| Availability: | |
|---|---|
| Quantity: | |
ZSJH
Galvanized threaded steel pipe combines zinc-coated steel tubing with male threaded ends for connection to compatible couplings, elbows, tees and other fittings. It supports mechanical assembly without on-site welding, making it a practical option for building-service piping and mechanical installations where threaded connections are specified.
Reliable performance depends on matching the pipe specification, wall thickness, thread standard, fittings and service conditions—not simply selecting the same nominal size.
| Parameter | Specification / Ordering Requirement |
|---|---|
| Product | Galvanized round steel pipe with threaded ends |
| Pipe Size | Specify DN/NPS designation and actual outside diameter |
| Wall Thickness | Thickness in mm, schedule or applicable thickness series |
| Length | Fixed or cut lengths, subject to confirmation |
| Material | Carbon steel; grade and manufacturing route as specified |
| Galvanizing | Coating method, internal/external coverage and acceptance requirements to be agreed |
| Thread Standard | NPT, ISO 7-1/BSPT or another specified system, subject to confirmation |
| End Configuration | Both ends threaded or one end threaded, as required |
| Couplings | Supplied separately or fitted, if specified |
| Thread Protection | Protective caps and suitable preservation as agreed |
| Inspection | Dimensions, thread gauging, surface condition and tests required by the pipe standard |
| Documentation | Material and inspection records as agreed before ordering |
Recommended ordering format:
Pipe Standard + Grade + Size + Wall Thickness + Length + Thread Standard + Coupling Requirements.

The pipe end features an external thread that engages with a compatible female-threaded fitting. Important inspection points include:
Correct thread form, pitch and taper where applicable.
Thread length and engagement in accordance with the specified standard.
Clean lead-in and freedom from damaging burrs.
Acceptable gauging results and protection during transport.
Adequate remaining steel thickness beneath the thread roots.
Thread cutting removes material from the pipe wall. Thin-wall tubing should therefore not be assumed suitable for threading without checking the relevant product requirements.
Machining can also remove zinc from the threaded area. Specify how machined threads are to be preserved or protected; a galvanized pipe body does not automatically mean fully zinc-coated threads.
A straight threaded coupling joins two compatible male-threaded pipe ends through its internal threads. Specify the coupling material, fitting standard, nominal size, thread type and required pressure/temperature suitability.
For installation:
Confirm that the pipe and fitting threads are compatible.
Inspect and clean the threads before assembly.
Apply a sealing material suitable for the thread system, fluid and temperature.
Assemble using the fitting manufacturer’s procedure, avoiding cross-threading and excessive tightening.
Support the pipework and complete the required system testing.
A standard straight coupling is different from a union. Where pipes cannot rotate or future dismantling is required, select an appropriate union or alternative connection arrangement.
| Dimension | Why It Matters |
|---|---|
| DN / NPS | Nominal identification used to select the pipe and fittings |
| Outside Diameter — OD | Actual pipe-body dimension; nominal size is not the measured diameter |
| Wall Thickness — t | Affects strength, weight and remaining thickness after threading |
| Overall Length — L | Required for fabrication and delivery planning |
| Thread Length | Must meet the specified thread requirements |
| Assembled Length | Depends on fitting dimensions and thread engagement |
For prefabricated installations, provide drawings showing the required assembled dimensions. Cut length and assembled length should not be treated as identical.
| Thread System | Relevant Standard | Selection Note |
|---|---|---|
| NPT | ASME B1.20.1 | Specify NPT explicitly and match the mating fitting |
| ISO 7-1 / Commonly Called BSPT | ISO 7-1 | Specify the external and internal thread designations, such as R with compatible Rp or Rc |
| BSPP / G | ISO 228-1 | Parallel threads requiring a suitable separate sealing arrangement |
ASME B1.20.1 covers dimensions and gauging for NPT and other listed inch pipe threads. ISO 7-1 addresses joints made pressure-tight on the threads, while ISO 228-1 addresses threads where pressure-tightness is not achieved on the threads themselves. NPT and BSP threads should not be treated as interchangeable.
Avoid ordering by “BSP” alone: identify the exact thread and mating connection required.

The pipe-body standard, thread standard and coating requirements should be identified separately.
| Standard | Relevant Scope |
|---|---|
| ASTM A53/A53M | Welded and seamless steel pipe, including hot-dip zinc-coated pipe |
| EN 10255 | Non-alloy steel tubes suitable for welding and threading |
| EN 10240 | Internal and/or external hot-dip galvanized coatings applied to steel tubes in automatic plants |
| ASME B1.20.1 / ISO 7-1 | Thread dimensions and associated requirements for the selected system |
These standards describe different parts of the specification. Compliance is specific to the ordered product, standard edition and supporting documents.
Pipe markings or bundle tags may identify the manufacturer, pipe standard, grade, size, wall designation and heat or batch reference. Thread type and coupling details should also appear clearly in the purchase documents.
Illustrative order description:
Galvanized Threaded Steel Pipe — ASTM A53/A53M, Type E, Grade B — NPS 1 — Schedule 40 — Length 6,000 mm — Both Ends NPT Threaded — Matching Coupling Required — Thread Protectors
This example illustrates ordering information, not confirmed stock availability or certification.
Common terms include:
TBE: Threaded Both Ends.
TOE: Threaded One End.
T&C: Threaded and Coupled; confirm coupling quantity and whether fitted.
SCH: Pipe schedule designation.
DN / NPS: Nominal pipe-size designations.
Building-Service Piping
For suitable water, air and utility installations where galvanized steel pipe and threaded connections meet the system specification.
Mechanical Installation
For connecting compatible valves, fittings and equipment inlets, including short pipe sections and installation pipework.
Maintenance & Alteration Work
For projects using existing compatible threaded systems, with pipe condition and connection requirements checked before installation.
Fire-Protection Piping
Only where the system design, applicable codes and required listings or approvals permit the specified pipe and fittings.
Drinking-water, gas and other regulated services require application-specific acceptance. Galvanizing alone does not establish suitability.
Can NPT pipe be connected directly to BSPT fittings?
They should not be mixed. Use matching threads or a correctly specified adapter.
Are couplings included?
State this in the inquiry. Confirm quantity, material, fitting standard and whether the coupling is fitted to the pipe or packed separately.
Does threading affect the pipe wall?
Yes. Thread cutting reduces the wall locally. The pipe must have suitable dimensions and meet the relevant requirements for threaded service.
Do threaded joints need sealant?
Use the sealing arrangement specified for the thread system. Select sealants for compatibility with the fluid, temperature and any required approvals.
What pressure can the pipe withstand?
There is no universal pressure rating for this product name. Suitability depends on the pipe specification, size, wall thickness, temperature, fittings, joints and applicable design code.
Are machined threads protected against corrosion?
Thread cutting can remove the zinc coating. Confirm preservation, exposed-thread protection and the required maintenance or finishing procedure.
Can this product be used for drinking water?
Only after confirming local requirements, material acceptance and relevant approvals for the complete system.
ZSJHSTEEL helps overseas buyers define a complete threaded-pipe specification, including pipe dimensions, wall thickness, thread system and coupling requirements.
For contractors and mechanical installers, our focus is clear technical communication and coordinated sourcing. Inspection documents, thread protection, packing and delivery details can be agreed during quotation to support the project’s installation needs.
Send ZSJHSTEEL your:
Pipe standard, steel grade and DN/NPS size.
Wall thickness or schedule and required length.
Exact thread standard and end configuration.
Coupling quantity, material and fitting requirements.
Galvanizing and machined-thread protection requirements.
Intended service, operating pressure and temperature.
Quantity, required documents and delivery destination.
Contact ZSJHSTEEL for galvanized threaded steel pipe and compatible connection options matched to your building or mechanical installation.
content is empty!