| Availability: | |
|---|---|
| Quantity: | |
ZSJH STEEL
Order item | Options and drawing requirements |
Section designation | W12×26, W16×40 and W18×50 are example designations. Quote the full W designation and confirm availability by grade and quantity. |
Steel grade | ASTM A992 or ASTM A572 Grade 50 may be quoted where specified and available for the selected W-shape. Other grades can be reviewed against the project standard. |
Finished length | Square-cut ends or drawing-specified angled cuts. State finished length, end angles and any special tolerances. |
Hole pattern | Web drilling, flange drilling or both, where shown on the approved drawing. Specify hole size, location, spacing and the reference end or face. |
Finish | Plain mill finish, shop primer or a specified coating system, subject to the order scope. Identify any areas to be left uncoated. |
Identification and packing | Piece marks by beam or erection area. List bundle IDs, packing labels and shipment sequence if needed. |
Finished lengths, end cuts, hole patterns and member identification can be customized to the approved drawings and project requirements.
Use the full W designation on the purchase list. For example, W12×26 gives the nominal depth series and a nominal weight of 26 lb/ft. If two beams share a section size but differ in length or hole layout, give them separate piece marks. Show which end the dimensions start from and identify handed or mirrored pieces on the drawing.
For bolted mezzanine framing, warehouse extensions or modular steel frames, request a packing list that ties each bundle to its piece marks. Confirm whether connection plates, bolts, mill test reports and dimensional inspection records are included in the quotation.
Provide the section designation, grade, finished length, quantity, piece mark, approved drawing revision, finish and delivery destination. Attach the cut list and dimensioned shop drawings or CNC files if available.
Button Request a Pre-Drilled Beam Quote
content is empty!