| Availability: | |
|---|---|
| Quantity: | |
ZSJH
ASTM A709/A709M is intended for structural steel used in bridge applications. Grade 50 provides a practical balance of strength, weldability, fabrication performance and project cost.
The parallel flanges primarily resist bending stresses, while the web transfers shear forces. This efficient configuration allows W sections to provide high structural performance relative to their weight.
A broad range of American W-shape designations allows engineers to select a section according to span, loading, deflection limits, lateral stability and connection requirements.
The beams can be cut, drilled, coped, welded and fitted with stiffeners, connection plates or bearing components according to approved fabrication drawings.
Charpy V-notch impact testing can be arranged when required by the bridge specification. Test temperature, frequency, toughness zone and acceptance criteria must be stated in the purchase documents.
Material test certificates, heat numbers and other inspection records can be supplied according to the agreed documentation requirements.
| Parameter | Available Specification |
|---|---|
| Product Name | ASTM A709 Grade 50 Wide-Flange W Beam |
| Product Form | Hot-rolled American W-shape section |
| Material Standard | ASTM A709/A709M |
| Steel Grade | Grade 50 |
| Minimum Yield Strength | 50 ksi / 345 MPa, subject to applicable thickness and specification revision |
| Minimum Tensile Strength | Typically 65 ksi / 450 MPa, subject to applicable thickness and specification revision |
| Section Series | Standard American W shapes |
| Section Dimensions | According to the specified W designation and applicable dimensional tables |
| Length | Standard mill lengths or project-specific cut lengths |
| Dimensional Tolerances | ASTM A6/A6M or agreed project requirements |
| Surface Condition | As-rolled, shot-blasted, shop-primed or coated |
| Processing | Cutting, drilling, coping, welding and component assembly |
| Impact Testing | Available when specified in the purchase documents |
| Inspection Documents | Mill test certificate and agreed inspection records |
| Packaging | Bundled or project-specific export packaging |
Exact W-shape availability, section weight, length, chemical composition, mechanical properties and testing requirements must be confirmed before ordering.

ASTM A709 Grade 50 W beams may be used in:
Highway overpasses
Short-span roadway bridges
Bridge deck stringer systems
Cross beams and floor beams
Pedestrian and cycle bridges
Railway overpass structures
Transportation terminals
Approach structures and ramps
Bridge widening projects
Structural strengthening work
Replacement of damaged bridge members
Municipal infrastructure projects
Fabricated bridge-support assemblies
These W beams are suitable for new construction, component replacement and rehabilitation projects that specify American wide-flange sections and ASTM A709 Grade 50 material.
Rolled W sections are commonly considered for short-span framing, stringers, floor beams and secondary bridge members. Whether they are appropriate for a particular span depends on dead load, live load, fatigue, deflection, lateral-torsional buckling, connection design and local bridge regulations.
Longer spans or unusually heavy loading may require welded plate girders instead of rolled W sections. Final section selection must therefore be completed or approved by a qualified structural or bridge engineer.
Steel is produced to the required chemical composition and mechanical-property criteria. Heat identification is maintained to support material traceability.
Heated steel is passed through calibrated rolling stands to form the web, parallel flanges and root fillets of the specified W profile.
The rolled sections are cooled under controlled conditions and mechanically straightened to meet the applicable dimensional tolerances.
Section depth, flange width, web thickness, flange thickness, straightness, length and unit weight are checked against the ordered W designation.
Tensile testing and other required material tests are completed in accordance with the applicable specification and purchase conditions. CVN testing is performed only when specified.
Beams may be cut to length and processed with drilled holes, copes, connection plates, stiffeners or welded attachments according to approved drawings.
Depending on the service environment, the beams may be supplied as-rolled or prepared by abrasive blasting, priming and protective coating.
Identification, dimensions, fabricated details, surface condition and documentation are checked before the material is bundled or prepared for export shipment.
Reliable yield strength for bridge-related structural applications
Efficient resistance to bending and shear forces
Wide selection of standardized W-shape sizes
Suitable for bolted and welded construction
Custom-length cutting and fabrication support
Optional project-specific impact testing
Reduced on-site processing when supplied fabrication-ready
Traceable material and inspection documentation
Suitable for both new bridges and rehabilitation projects
Compatible with different protective coating systems
ASTM A709 Grade 50 is not automatically a weathering steel grade. For exterior bridge service, the coating system should be selected according to atmospheric exposure, humidity, deicing-salt contamination, marine influence, maintenance strategy and the relevant transportation-authority specification.
Available preparation and protection options may include:
Abrasive blasting
Temporary shop primer
Zinc-rich primer
Multi-layer bridge coating systems
Hot-dip galvanizing, subject to section size and project suitability
Project-specific paint systems
Coating compatibility, surface preparation grade, dry-film thickness and repair procedures should be confirmed before production.
Looking for ASTM A709 Grade 50 W beams for a bridge or transportation project? Send ZSJH your required W-shape designation, beam length, quantity, specification revision, CVN requirements, fabrication drawings, surface treatment and destination port.
Our team will review your technical requirements and provide a project-specific quotation, production plan and delivery solution.
content is empty!