| Availability: | |
|---|---|
| Quantity: | |
ZSJH
The round steel tie rod support system is made of domestic Q235 steel. Manual rust removal above Grade St2.0 or shot blasting rust removal above Grade Sa2.0, pre-coated with 80μm alkyd primer or conventional galvanization.
Purlin Tie Rod is an essential lateral bracing component matched with C/Z roof & wall purlins in steel structure buildings. It forms a stable horizontal tension system together with angle braces, purlin cleats and tension nuts, preventing purlins from lateral bending, twisting and overturning under wind load, snow load and construction dynamic load. Widely used in industrial workshops, logistics warehouses, prefab parking buildings, solar power station steel frames and agricultural steel barns.
Parameter Item | Details |
|---|---|
Product Full Name | Prefabricated Purlin Tie Rod / Steel Purlin Bracing Rod |
Core Product Types | Fixed-length Round Steel Tie Rod, Adjustable Angle Steel Tie Rod, Channel Steel Tie Rod, Roof Purlin Special Tie Rod, Wall Purlin Bracing Rod, High-strength Threaded Tie Rod |
Core Positioning | Special supporting bracing component for steel structure purlin system, factory prefabricated, on-site fast installation, used to enhance the stability, wind resistance and torsion resistance of C/Z/H steel purlins |
Core Advantages | 40% shorter on-site installation time than traditional on-site cutting components, high tensile strength, strong anti-corrosion performance, adjustable length, fully compatible with mainstream purlin specifications, reusable, low maintenance cost |
Customization Support | Full size, material, surface treatment, hole position, length customization according to project drawings, purlin specifications & local design standards |
Raw Material: Q235B carbon steel round bar
Surface Treatment: Full hot-dip galvanized, zinc coating 80g/m² as standard, 120g/m² optional for coastal corrosive areas
Common Diameter Specifications: Φ12mm, Φ14mm, Φ16mm, Φ18mm, Φ20mm (customizable thicker rods for large-span heavy-load projects)
Production Process: Integral round steel cutting, both ends thread rolling, hot-dip galvanizing after threading; complete sets with galvanized adjusting nuts, flat washers and angle braces
Custom Length: Produced strictly according to purlin layout drawing, length ranges 0.5m–12m
Matching Components: Tie rod main bar, hexagonal adjusting nut, flat washer, angle brace, purlin connecting clip
Application Position: Horizontal tie rods between adjacent roof purlins; diagonal angle tie rods for slope roof lateral stabilization
Supporting System: Perfect matching with galvanized 80g/m² C & Z purlins, heavy-load steel frame, Q900 liner panel roof system
Parameter Item | Standard Value | Customization Range |
|---|---|---|
Main Rod Type | Round Steel Rod, Equal Angle Steel Rod, Channel Steel Rod, Threaded Rod | Customized special section available |
Rod Diameter / Section Size | Round Steel: Φ12mm / Φ14mm / Φ16mm / Φ18mm / Φ20mm / Φ22mm / Φ25mm; Angle Steel: L40×40mm / L50×50mm / L63×63mm | Round Steel: Φ10mm – Φ40mm; Angle Steel: L30×30mm – L100×100mm |
Standard Length | 1m / 1.5m / 2m / 3m / 4m / 5m / 6m | 0.5m – 12m |
Wall Thickness | Angle Steel / Channel Steel: 3mm / 4mm / 5mm / 6mm | 2mm – 12mm |
Standard Hole Diameter | Φ14mm / Φ16mm / Φ18mm / Φ20mm | Φ10mm – Φ30mm |
Standard Hole Spacing | 50mm / 100mm / 150mm / 200mm | Customized according to purlin hole position |
Adapted Purlin Specifications | C80-C300, Z80-Z300, H100-H400 Steel Purlins | Full range of purlin specifications customization |
Adjustable Length Range | 0–200mm (with turnbuckle) | 0–500mm customized adjustable design |
Strong Lateral Stabilization, Prevent Purlin Deformation
Tension structure restricts horizontal displacement of C/Z purlins, eliminates purlin torsion and side deflection under strong wind suction or heavy snow pressure, greatly improving overall roof structural safety factor.
Full Galvanized Anti-Corrosion, Consistent with Purlin System
Integral hot-dip galvanizing including threaded sections, uniform zinc layer avoids thread rust and jamming. Same 80g/m² galvanized standard as purlins, unified anti-rust performance for the whole secondary support system.
Adjustable Tension Design, Convenient On-Site Calibration
Double-end thread with matching galvanized adjusting nuts allows workers to fine-tune tension force during installation, correct purlin flatness easily without cutting or reworking steel parts.
Complete Supporting Kit, One-Stop Procurement
Supplied as full sets with tie rod, nuts, washers and angle braces together. Clients do not need to purchase scattered accessories separately, reduce matching errors and purchasing procedures.
High Tensile Strength, Lightweight & Cost-Effective
Q235B solid round bar provides reliable tensile capacity with low self-weight. Lower material cost compared with heavy steel bracing beams, effectively control total steel consumption of the project.
Universal Matching for All Standard Purlin Sizes
Φ12–Φ20 multi-spec rods fit C80~C200, Z100~Z200 all common purlin models, compatible with light steel workshops and large-span heavy-load industrial plants.
Simple Bolted Installation, Short Construction Period
No on-site welding required; directly pass through pre-punched holes on purlins and fasten with nuts. Fast assembly reduces labor time and construction cycle.
Long Service Life & Low Later Maintenance
Galvanized layer resists rain, humidity and industrial dust; threads will not lock or rust for decades under normal environment, only simple annual inspection needed without frequent replacement.
Customizable Size for Special Engineering Layout
Custom rod diameter, thread length and overall total length based on project span, roof slope and local wind load parameters, meet personalized design requirements of architects.
Wide Application Compatibility
Suitable for factory roof systems, solar bracket auxiliary bracing, livestock barn enclosure frames, prefabricated parking lot roof and all kinds of prefab steel construction secondary structures.
Parameter Item | Details |
|---|---|
Main Structural Steel Grade | Q235B / Q355B Hot Rolled Round Steel, Angle Steel, Channel Steel; Stainless Steel 304/316 Optional for High Corrosion Environment |
Manufacturing Process | CNC Automatic Cutting, Precision Punching, Thread Turning, Bending Forming, Pre-assembled Matching; 100% factory prefabrication, no on-site secondary processing required |
Surface Anti-corrosion Treatment | Hot-dip Galvanization (Mainstream) / Electro-galvanization / Epoxy Powder Coating / Painted Finish; Passivation Treatment for Stainless Steel |
Anti-corrosion Performance | Hot-dip Galvanized Layer ≥ 85μm, Salt Spray Resistance ≥ 1000 Hours; Powder Coating Layer ≥ 50μm, UV Resistance ≥ 2000 Hours |
Connection Method | High-strength Bolt Connection (Mainstream) / Welded Connection; Adjustable Tie Rod with Turnbuckle for Length Fine-tuning |
Quality Control | Full-size Precision Inspection, Tensile Strength Test, Zinc Layer Thickness Test, Salt Spray Test, Hole Position Accuracy Test |
Parameter Item | Standard Value |
|---|---|
Yield Strength | Q235B ≥ 235MPa; Q355B ≥ 355MPa; Stainless Steel 304 ≥ 205MPa |
Tensile Strength | Q235B 375-500MPa; Q355B 470-630MPa; Stainless Steel 304 ≥ 520MPa |
Shear Strength | ≥ 0.6 times of tensile strength, fully meet the bracing load requirements of steel structure purlin system |
Wind Resistance Capacity | Support 0.5–1.5 kN/㎡ wind load, enhance the overall wind resistance of the purlin system by more than 30% |
Torsion Resistance | Effectively reduce the torsion deformation of purlins under wind load, improve the overall stability of the roof/wall system |
Fatigue Performance | Meet 2 million times wind load cycle requirements, adapt to long-term wind vibration environment |
Temperature Adaptation Range | -40℃ to +120℃, no cracking, no deformation under extreme weather conditions |
Design Service Lifespan | 25–50 years design life, fully matched with the service life of steel structure purlins |
Parameter Item | Details |
|---|---|
Standard Installation Method | Bolted Fixed Installation / Welded Fixed Installation; Adjustable Tie Rod with Turnbuckle for Length Fine-tuning; 100% dry work, no on-site wet work |
Matching Accessories | High-strength Hexagon Bolt, Self-tapping Screw, Washer, Nut, Turnbuckle, Connecting Plate, Angle Bracket, Sealing Strip, Waterproof Cap |
Adapted Purlin Types | 100% Compatible with C-shaped Steel Purlin, Z-shaped Steel Purlin, H-shaped Steel Purlin, Cold-formed Steel Purlin in the market |
Adapted Building Types | Steel Structure Factory Workshop, Warehouse, Logistics Center, Industrial Park, Commercial Building, Public Facility, Solar Power Station Steel Structure |
Installation Efficiency | 50% faster than traditional on-site cutting & welding components, 2 workers can complete 100 sets of tie rod installation within 1 day |
Maintainability & Adjustability | Modular design, single component can be replaced independently without disassembling the whole purlin system; Adjustable tie rod supports length fine-tuning during installation & maintenance |
Compatibility | Fully compatible with mainstream steel structure design software & drawing standards, no need to adjust the original purlin design drawings |