| Availability: | |
|---|---|
| Quantity: | |
VR-III deep corrugated profile is a sleek and elegant vertical rib profile, comparable to curtain wall visual effects.
Parameter Item | Details |
|---|---|
Product Full Name | VR-III Deep Corrugated Steel Roofing & Wall Panel System |
Core Product Types | VR-III Single Skin Deep Corrugated Panel, VR-III Composite Insulated Corrugated Panel, VR-III Custom Special-shaped Corrugated Profile |
Core Positioning | Universal prefabricated deep corrugated steel panel system for roof & wall cladding, 100% factory prefabrication, on-site fast installation, fully adapted to various building waterproof, wind resistance & decorative requirements |
Core Advantages | 50% shorter on-site installation time than traditional roof/wall systems, excellent waterproof & wind resistance, superior weather & aging resistance, high structural strength, perfect matching with mainstream building insulation systems, reusable, low maintenance cost |
Customization Support | Full thickness, length, color, surface finish, hole position, function customization according to project drawings, building type & local design standards |
Width: 600mm, expanded width: 1000mm Rib height: 55mm, corrugation angle: 76 degrees Slightly lower material utilization than other panel types but worth the value.
1、Basic Profile Parameters
Model: VR-III Deep Corrugated Wall Panel
Effective coverage width: 600 mm
Raw coil unfolded width: 1000 mm
Rib depth: 55 mm
Corrugation angle: 76°
Custom length: Unlimited according to transport limit
Thickness range: 0.4–1.2 mm
Parameter Item | Standard Value | Customization Range |
|---|---|---|
Standard Effective Panel Width | 836mm (32.9in) | 600mm – 1200mm |
Total Panel Width | 900mm (35.4in) | 650mm – 1250mm |
Corrugation Height | 35mm (1.38in) | 20mm – 50mm |
Corrugation Pitch | 210mm (8.27in) | 150mm – 300mm |
Standard Panel Thickness | 0.5mm / 0.6mm / 0.8mm / 1.0mm / 1.2mm | 0.3mm – 3.0mm |
Standard Panel Length | 2440mm / 3050mm / 6096mm | 1000mm – 12000mm |
Standard Hole Diameter | Φ14mm / Φ16mm | Φ10mm – Φ20mm |
Standard Hole Spacing | 300mm / 400mm | Customized according to purlin spacing |
Pre-painted galvanized steel (PPGI)
Galvalume steel (GL/Aluzinc, 80–275g/m² zinc coating)
Aluminum alloy sheet
PVDF / SMP high weather-resistant coated steel
Parameter Item | Details |
|---|---|
Main Base Material | Hot-dip Galvanized Steel Sheet, Aluzinc Steel Sheet, Stainless Steel 304/316, 6063-T5 Aluminum Alloy |
Surface Coating Material | Polyester (PE) Coating, PVDF Fluorocarbon Coating, SMP Silicone Modified Polyester Coating, Acrylic Coating, Wood Grain/Stone Grain Transfer Coating |
Manufacturing Process | Continuous High-speed Cold Roll Forming Line, CNC Precision Punching, Bending, Crimping, Stamping; 100% factory prefabrication, pre-punched installation holes & pre-formed edge sealing optional |
Surface Treatment | Hot-dip Galvanization for Steel Base; Electro-galvanization / Chromium-free Passivation Optional; Anodizing / Powder Coating for Aluminum Alloy; Polishing / Passivation for Stainless Steel |
Anti-corrosion Process | Hot-dip Galvanized Base Layer + Double-sided Coating Protection; Heavy-duty Anti-corrosion Treatment for Coastal/Industrial High Corrosion Environment |
Quality Control | Full-size Precision Inspection, Thickness Uniformity Test, Tensile & Hardness Test, Zinc Layer Thickness Test, Salt Spray Test, Coating Adhesion Test |
Mainly for building exterior wall cladding; widely used in modern office buildings, exhibition halls, shopping malls, industrial workshops, logistics warehouses, campus buildings, municipal public architecture, high-end facade renovation.
Self-drilling screws, butyl sealing tape, edge flashing, corner trim, expansion brackets, waterproof gaskets.
Parameter Item | Standard Value |
|---|---|
Waterproof Performance | Pass 24-hour Continuous Water Spray Test, No Water Leakage; Water Impermeability ≥ 0.3MPa for 24h, Meet Global Waterproof Design Standards |
Wind Resistance Capacity | ≥ 1.2 kN/㎡ Wind Load, Coastal Enhanced Version ≥ 1.5 kN/㎡, Pass Wind Tunnel Test, Meet Global Wind Load Design Standards |
Snow Load Resistance | ≥ 0.5 kN/㎡ Snow Load, Heavy Snow Area Enhanced Version ≥ 1.0 kN/㎡ |
Fire Resistance Rating | Class A Non-combustible for Steel/Stainless Steel/Aluminum Alloy Panel, Meet GB8624, EN13501-1, ASTM E84 Fire Protection Standards |
Weather & Aging Resistance | UV Resistance ≥ 2000 Hours, Xenon Lamp Aging Test ≥ 5000 Hours, No Cracking, No Fading, No Brittleness Under Long-term Sun Exposure |
Temperature Adaptation Range | -40℃ to +120℃, No Cracking, No Deformation, No Melting Under Extreme High/Low Temperature Conditions |
Mechanical Properties | Tensile Strength ≥ 300MPa; Elongation at Break ≥ 20%; Hardness ≥ HRB 50, Meet ASTM A653, EN 10142 Steel Sheet Standards |
Design Service Lifespan | 15–30 Years Design Life for Standard PE Coated Panel; 30–50 Years for PVDF Coated/Stainless Steel/Aluminum Alloy Panel |
Premium Architectural Aesthetics
55mm ultra-deep vertical rib creates strong three-dimensional shadow lines, minimalist vertical texture, visual effect comparable to aluminum curtain wall, greatly upgrade building grade, popular with architects for high-end facade design.
Superior Structural Rigidity & Long Span Capacity
Deeper corrugation greatly improves section stiffness, stronger anti-bending & anti-snow load performance; allows wider purlin spacing, reduces steel substructure consumption, lowers total project cost.
Excellent Waterproof & Drainage Performance
76° optimized rib angle accelerates rainwater flow, no water accumulation inside ribs; matched full set waterproof fittings eliminate leakage risk for vertical wall installation.
Strong Wind & Corrosion Resistance
Galvalume/PVDF coating provides long-term anti-rust performance, suitable for coastal high-salt, humid industrial areas; deep rib structure resists strong wind uplift, passes international wind load test standards.
Easy & Fast Installation
Exposed fastener design, simple splicing operation; light panel weight reduces hoisting difficulty, shortens construction period, saves labor cost.
Rich Customization Options
30+ standard RAL colors, matte/embossed surface optional; length fully customized to minimize panel joint seams, neat facade appearance.
Long Service Life & Low Maintenance
PVDF coating reaches 20–30 years service lifespan, anti-fade, anti-chalking; smooth surface easy to clean, no frequent repainting required.
Parameter Item | Details |
|---|---|
Standard Installation Method | Exposed Screw Fastening Installation, Concealed Clip Installation, Dry-hanging Installation; 100% Dry Work, No On-site Wet Work |
Matching Accessories | Full Set of Matching Fasteners, Washers, Sealant Strips, Waterproof Caps, Flashing, End Caps, Purlin, Insulation Board, Gutter & Downspout |
Adapted Base | 100% Compatible with Steel Structure Purlin, Concrete Wall/Roof Base, Wooden Base, Existing Building Renovation Base, Insulation Board Base in the Market |
Adapted Building Types | Steel Structure Factory Workshop, Warehouse, Commercial Building, Residential House, Public Facility, New Energy Power Station, Marine/Offshore Engineering |
Installation Efficiency | 50% Faster Than Traditional Tile & Concrete Roof/Wall Systems, 2 Workers Can Complete 100㎡ Panel Installation Within 1 Day |
Maintainability & Repairability | Modular Design, Single Damaged Panel Can Be Replaced Independently Without Disassembling the Whole System; No Need for Large-scale Building Removal During Maintenance |
Compatibility | Fully Compatible with Mainstream Roof Insulation System, Waterproof System, Solar Panel Mounting System, Green Roof System, No Need to Adjust the Original Building Design |
Scenario Category | Specific Applications |
|---|---|
Industrial Buildings | Factory Workshop, Production Plant, Industrial Warehouse, Logistics Center, Cold Storage, Clean Room, Industrial Park Roof & Wall Cladding |
Commercial & Service Buildings | Shopping Mall, Exhibition Hall, Auto 4S Shop, Hotel, Office Building, Restaurant, Coffee Shop, Commercial Complex Roof & Wall |
Residential Buildings | Villa, Apartment, Townhouse, Residential Community, Rural Self-built House, Holiday House Roof & Wall Renovation |
Public & Municipal Buildings | School, Hospital, Gymnasium, Stadium, Airport Terminal, Railway Station, Bus Station, Government Office Building, Park & Garden Facility Roof & Wall |
New Energy & Special Engineering | Solar Power Station Roof/Wall, Wind Power Plant Supporting Building, Energy Storage Power Station, Lithium Battery Factory, Offshore Platform, Marine Engineering Cladding |
Special Scenarios | Coastal Corrosion-resistant Buildings, High-altitude Steel Structures, Cold Region Low-temperature Resistant Engineering, Clean Workshop, Dust-free Room, Fire-resistant & Explosion-proof Workshop, Agricultural Greenhouse, Breeding Workshop Roof & Wall |