| Availability: | |
|---|---|
| Quantity: | |
WA-825 is a small corrugated panel with an aesthetically pleasing visual effect.
High utilization rate of panel types
Particularly suitable for use in single-story or low-equipment rooms.
Parameter Item | Details |
|---|---|
Product Full Name | Prefabricated Light-Gauge Steel Structure System |
Core Product Types | Light-Gauge Steel Framing (LGSF), Cold-Formed Steel Structure, Light Steel Villa Frame, Modular Light Steel Structure, Light Steel Partition Wall System |
Core Positioning | Lightweight, high-strength cold-formed steel structural system, suitable for low-rise & mid-rise residential, commercial and industrial buildings, factory prefabricated, on-site fast assembly |
Core Advantages | 70% shorter construction cycle than traditional buildings, 90% factory prefabrication, no on-site wet work, lightweight, high seismic resistance, flexible layout, reusable, low foundation cost |
Customization Support | Full size, layout, material, thickness, function customization according to project drawings & requirements |
WA-825 metal wall panel is a popular trapezoidal corrugated exterior wall cladding system widely used for global industrial construction, with an effective covering width of 825mm after installation. This wall panel adopts lightweight high-strength metal substrate with standardized trapezoidal rib design, matched with complete supporting accessories including corner flashings, window trims, top/bottom closing plates, sealing butyl tapes and self-drilling anti-rust fasteners to form a fully enclosed wall enclosure system.
Parameter Item | Standard Value | Customization Range |
|---|---|---|
Main Steel Section Type | C-shaped Steel, U-shaped Steel, Z-shaped Steel, Hat-shaped Steel, Box-shaped Steel | Customized special section available |
Section Height | 50mm / 75mm / 90mm / 100mm / 120mm / 150mm / 200mm | 40mm – 300mm |
Steel Wall Thickness | 0.8mm / 1.0mm / 1.2mm / 1.5mm / 2.0mm / 2.5mm / 3.0mm | 0.6mm – 6.0mm |
Standard Length | 3m / 6m / 9m / 12m | 1m – 18m |
Standard Stud Spacing | 400mm / 600mm | 300mm – 1200mm |
Adapted Building Floors | 1–3 floors (standard); 4–6 floors (reinforced frame) | 1–10 floors |
Main Frame Span | 3m / 6m / 9m | 2m – 15m |
Available base materials: galvalume steel coil, PVDF / PE prepainted galvanized steel, aluminum sheet. Custom thickness ranges from 0.4mm to 1.0mm, with dozens of standard colors and matte/bright surface finishes for selection. All panels are pre-cut to fixed lengths in the factory to avoid waste on site. The trapezoidal rib structure enhances wall rigidity, and overlapping side lap design with sealed joints provides reliable water resistance. The whole set complies with international building standards, supports CE certification, OEM & ODM customized service for steel structure factories, industrial parks, warehouses and commercial buildings, and supports bundled container shipment for overseas projects.
Parameter Item | Details |
|---|---|
Main Structural Steel Grade | Q235B / Q355B Hot Rolled Steel Coil/Sheet; Galvanized Steel Sheet; Stainless Steel 304/316 Optional |
Manufacturing Process | Continuous Cold Roll Forming, CNC cutting & punching, one-time section shaping, pre-punched installation holes, pre-embedded pipeline holes |
Surface Treatment | Hot-dip Galvanization / Electro-galvanization / Epoxy Powder Coating / Painted Finish; Passivation treatment for stainless steel |
Anti-corrosion Performance | Galvanized layer ≥ 80μm, salt spray resistance ≥ 1000 hours; Powder coating layer ≥ 50μm |
Connection Method | High-strength Self-tapping Screw Connection / Rivet Connection / Bolt Connection; 100% on-site dry connection, no welding required |
Effective coverage width: 825mm
Profile type: Trapezoidal corrugated wall panel
Optional thickness: 0.4mm / 0.5mm / 0.6mm / 0.7mm / 0.8mm / 1.0mm
Raw material: Prepainted galvalume steel / aluminum alloy
Surface coating: PE polyester coating, PVDF Kynar anti-ultraviolet coating
Installation method: Horizontal / vertical wall mounting with exposed waterproof fasteners
Supporting accessories: Inner & outer corner flashing, window surround, base trim, ridge side cover, sealing tape
Parameter Item | Standard Value |
|---|---|
Seismic Resistance Grade | Grade 8 / Grade 9 customizable, meet global seismic design codes, lightweight structure reduces seismic damage |
Wind Resistance Capacity | 0.5–1.2 kN/㎡ wind load, coastal enhanced version ≥ 1.5 kN/㎡ |
Fire Resistance Rating | 1h / 2h / 3h fireproof design with fireproof board cladding; steel itself is non-combustible, meet GB8624, EN13501-1 standards |
Thermal Insulation Coefficient | U-value ≤ 0.35 W/(㎡·K) with insulated cavity filling, meet global energy-saving building standards |
Sound Insulation Performance | Partition wall ≥ 40dB, floor ≥ 45dB, meet building acoustic design standards |
Load Bearing Capacity | Live load: 2.0–5.0 kN/㎡ (Residential:2.0kN; Office:2.0kN; Industrial:5.0kN) |
Design Service Lifespan | 50–70 years design life, adjusted according to material & anti-corrosion treatment |
High Coverage Width, Lower Comprehensive Cost
825mm effective coverage brings fewer panels per square meter compared with narrow-size wall sheets, greatly reducing raw material consumption, fastener quantity and installation labor cost, effectively controlling overall enclosure budget for large industrial parks and factories.
Trapezoidal Rib High Rigidity, Stable Wall Structure
Uniform high and low trapezoidal ribs significantly improve bending resistance and impact resistance of the wall panel. It can withstand external impact from transport vehicles, equipment handling and severe weather, not easy to dent or deform; allows wider spacing of wall purlins to save secondary steel frame cost.
Reliable Lap Waterproof Design, Prevent Wall Seepage
Overlapping side lap structure with matched butyl sealing tape blocks rainwater capillary penetration. Complete supporting trim accessories fully wrap wall corners, windows and floor junctions, no exposed gaps, solving wall water leakage troubles in rainy, coastal and high humidity areas.
Long-Lasting Anti-Corrosion & Color Retention
Two coating options for different service environments: PE polyester coating for inland general factories with 10–15 years color guarantee; high-performance PVDF coating for coastal salt fog, chemical plants and new energy workshops, resisting UV, acid rain and industrial corrosive gas, anti-rust lifespan up to 25+ years. Galvalume substrate provides dual anti-corrosion protection.
Lightweight Material, Reduce Main Steel Structure Load
Metal wall panel features ultra-light weight per square meter, greatly lowering vertical load of main steel columns and wall purlins. Clients can choose lighter specification steel frames to further cut engineering costs without sacrificing wall safety.
Flexible Installation Way & Fast Construction Speed
Supports both horizontal and vertical installation according to building appearance design requirements. Factory pre-cut finished panels only need simple splicing and fixing on site; the construction efficiency is 3 times faster than brick walls or concrete wall panels, helping projects complete enclosure construction quickly and put into use early.
Rich Appearance Customization, Match Various Building Styles
Multiple standard color options, customizable matte, metal brushed, stone imitation surface. Simple neat trapezoidal lines fit modern industrial style, and can be matched with SR-600 standing seam roof system to realize unified wall-roof aesthetic effect for new energy factories and parks.
Green Recyclable & Easy Maintenance
Metal wall panels can be 100% recycled after building demolition without construction waste. Smooth panel surface is dust-proof and easy to clean; no regular painting maintenance needed during service life, only simple inspection of sealing joints annually to keep good wall performance.
Parameter Item | Details |
|---|---|
Standard Installation Method | On-site screw/rivet fixed assembly, modular hoisting installation; 100% dry work, no on-site wet work, no large-scale equipment required |
Matching Accessories | High-strength self-tapping screw, rivet, angle bracket, connecting plate, sealing strip, waterproof cap, door & window frame matching parts |
Adapted Foundation | Simple concrete foundation / strip foundation / pile foundation; No complex foundation treatment required, adapt to various terrains & soil conditions |
Installation Efficiency | 1000㎡ building main frame can be completed within 1 week on site, 70% shorter than traditional cast-in-place concrete buildings |
Maintainability & Reusability | Modular design, single component can be replaced independently; 90% of the structure can be disassembled and reused, reduce construction waste |
Scenario Category | Specific Applications |
|---|---|
Residential Scenarios | Light Steel Villa, Prefabricated Apartment, Staff Dormitory, Rural Self-built House, Townhouse, Residential Community, Holiday House |
Commercial Scenarios | Modular Office Building, Hotel, Shopping Mall, Exhibition Hall, Restaurant, Coffee Shop, Commercial Complex, Auto 4S Shop |
Industrial Scenarios | Modular Factory Workshop, Warehouse, Logistics Center, Industrial Park, Clean Room, Cold Storage, Breeding Workshop |
Public & Municipal Scenarios | Modular School, Hospital, Clinic, Gymnasium, Bus Station, Police Station, Community Service Center, Emergency Rescue Shelter |
Special & Temporary Scenarios | Epidemic Isolation Ward, Disaster Relief Temporary House, Mobile Office, Event Venue, Construction Site Camp, Outdoor Exhibition Booth |