| Availability: | |
|---|---|
| Quantity: | |
LSP Long Span Panel is a screw-through single-layer metal panel. Its main ribs are 32 mm high with a center spacing of 305 mm, offering high rigidity, strong load-bearing capacity, and excellent wind resistance. Suitable for roofing and also applicable for wall applications, it is a high-quality, economical solution for roof and wall cladding.
Parameter Item | Details |
|---|---|
Product Full Name | Prefabricated Metal Roofing System |
Core Product Types | Standing Seam Metal Roof System, Trapezoidal Metal Roof System, Corrugated Metal Roof System, Composite Insulated Metal Roof System, Special-shaped Custom Metal Roof System |
Core Positioning | One-stop prefabricated metal roofing system, 80% factory prefabrication, on-site fast installation, fully adapted to various building roof waterproof, thermal insulation, energy-saving & decorative requirements |
Core Advantages | 50% shorter construction cycle than traditional roof systems, excellent waterproof & wind resistance, superior weather & aging resistance, high flexibility, perfect matching with mainstream building insulation systems, reusable, low maintenance cost |
Customization Support | Full panel type, material, thickness, width, length, color, surface finish, function customization according to project drawings, building type & local design standards |
Metal Roofing System is a complete integrated metal enclosure roofing solution, widely adopted for industrial, commercial and public architecture. The core metal panels are manufactured from galvanized steel, galvalume steel, aluminum alloy, stainless steel, with surface anti-corrosion coating including PVDF, SMP, PE polyester paint. Matching supporting accessories include purlins, self-tapping screws, sealing butyl tape, ridge caps, gutter, valley flashing, edge trim, thermal insulation wool, waterproof underlayment, anti-wind fixing brackets and sound insulation layers.
Parameter Item | Standard Value | Customization Range |
|---|---|---|
Main Panel Type | Standing Seam Panel, Trapezoidal Panel, Corrugated Panel, Composite Insulated Panel | Custom special-shaped panel available |
Standard Effective Panel Width | Standing Seam: 300mm / 400mm / 500mm / 600mm; Trapezoidal/Corrugated: 800mm / 900mm / 1000mm / 1200mm | 200mm – 1500mm |
Standard Panel Thickness | 0.5mm / 0.6mm / 0.8mm / 1.0mm / 1.2mm | 0.3mm – 3.0mm |
Standard Panel Length | 2440mm / 3050mm / 6096mm | 1000mm – 12000mm |
Standard Rib Height | Standing Seam: 25mm / 32mm / 40mm; Trapezoidal/Corrugated: 15mm / 20mm / 25mm / 30mm | 10mm – 50mm |
Standard Rib Spacing | 200mm / 250mm / 300mm | 150mm – 400mm |
Standard Roof Slope | Standing Seam: ≥ 3°; Trapezoidal/Corrugated: ≥ 5° | 1° – 30° |
Matching System Components | Purlin, Fastener, Clip, Sealant Strip, Waterproof Cap, Flashing, Gutter, Downspout, Insulation Board | Full set of matching components customization |
Main Metal Panel Types
Standing Seam Metal Roof Panel (Vertical Seam Panel)
Hidden fastener installation, no exposed screws on roof surface, excellent waterproof and wind resistance; thickness 0.6–1.2mm, most popular for large industrial plants, stadiums.
Corrugated Metal Roof Sheet
Low cost, simple installation, trapezoidal/corrugated profile, suitable for simple warehouses, temporary buildings, auxiliary workshops.
Aluminum Magnesium Manganese Alloy Roof Panel
Ultra strong corrosion resistance, lightweight, long service life, ideal for coastal salt fog areas, high-end commercial buildings and curved roofs.
Stainless Steel Roof Sheet
Super anti-corrosion performance, applied for chemical factories, sewage plants, marine engineering projects.
Parameter Item | Details |
|---|---|
Main Base Material | Hot-dip Galvanized Steel Sheet, Aluzinc Steel Sheet, Stainless Steel 304/316, 6063-T5 Aluminum Alloy, Copper Sheet |
Surface Coating Material | Polyester (PE) Coating, PVDF Fluorocarbon Coating, SMP Silicone Modified Polyester Coating, Acrylic Coating, Wood Grain/Stone Grain Transfer Coating |
Manufacturing Process | Continuous Cold Roll Forming Line, CNC Precision Punching, Bending, Crimping, Stamping; 100% factory prefabrication, pre-punched fastener holes & pre-crimped seams optional |
Surface Treatment | Hot-dip Galvanization for Steel Base; Electro-galvanization / Chromium-free Passivation Optional; Anodizing / Powder Coating for Aluminum Alloy; Polishing / Passivation for Stainless Steel |
Anti-corrosion Process | Hot-dip Galvanized Base Layer + Double-sided Coating Protection; Heavy-duty Anti-corrosion Treatment for Coastal/Industrial Environment |
Quality Control | Full-size Precision Inspection, Thickness Uniformity Test, Tensile & Hardness Test, Zinc Layer Thickness Test, Salt Spray Test, Coating Adhesion Test |
Main steel structure beam & secondary purlin
Sound insulation / thermal insulation cotton (glass wool / rock wool)
Waterproof breathable underlayment
Metal roof panel (core layer)
Sealing flashing, ridge, gutter & edge accessories
Optional solar support bracket, snow guard, ventilation system
Two Core Installation Methods
Hidden Standing Seam Installation
All fixing screws are concealed under vertical seams, no direct piercing on panel surface, effectively avoid screw hole water leakage, high wind resistance for high-rise and coastal areas.
Exposed Fastener Corrugated Installation
Screws penetrate panels directly with rubber sealing washers, low cost, fast construction, suitable for low-rise simple industrial buildings.
Parameter Item | Standard Value |
|---|---|
Waterproof Performance | Pass 24-hour Continuous Water Spray Test, No Water Leakage; Standing Seam System Water Impermeability ≥ 0.3MPa for 24h, Meet Global Waterproof Design Standards |
Wind Resistance Capacity | ≥ 1.2 kN/㎡ Wind Load, Coastal Enhanced Version ≥ 1.5 kN/㎡, Pass Wind Tunnel Test, Meet Global Wind Load Design Standards |
Snow Load Resistance | ≥ 0.5 kN/㎡ Snow Load, Heavy Snow Area Enhanced Version ≥ 1.0 kN/㎡ |
Fire Resistance Rating | Class A Non-combustible for Steel/Stainless Steel/Aluminum Alloy Panel, Meet GB8624, EN13501-1, ASTM E84 Fire Protection Standards |
Weather & Aging Resistance | UV Resistance ≥ 2000 Hours, Xenon Lamp Aging Test ≥ 5000 Hours, No Cracking, No Fading, No Brittleness Under Long-term Sun Exposure |
Temperature Adaptation Range | -40℃ to +120℃, No Cracking, No Deformation, No Melting Under Extreme High/Low Temperature Conditions |
Mechanical Properties | Tensile Strength ≥ 300MPa; Elongation at Break ≥ 20%; Hardness ≥ HRB 50, Meet ASTM A653, EN 10142 Steel Sheet Standards |
Design Service Lifespan | 15–30 Years Design Life for Standard PE Coated Panel; 30–50 Years for PVDF Coated/Stainless Steel/Aluminum Alloy Panel |
Core Advantages
Extremely Long Service Life & Outstanding Anti-Corrosion Performance
Aluminum magnesium manganese & galvalume panels with PVDF coating can serve 30–50 years; stainless steel panels reach over 60 years. Multi-layer anti-rust coating resists rain, snow, UV, coastal salt fog and weak industrial corrosive gas, no rust or peeling easily.
Superior Wind & Snow Load Resistance, Safe for Extreme Weather
Standing seam hidden buckle structure locks panels tightly together, with customized anti-wind support brackets, passes high wind load tests, suitable for typhoon coastal zones. High structural strength supports heavy snow accumulation in cold northern regions, no deformation or collapse.
Ultra Lightweight, Reduce Overall Building Cost
Metal panel weight is only 1/10 of concrete tile and clay tile, greatly lightens roof load. Customers can use thinner steel purlins and smaller foundation bearing capacity, effectively cut total steel consumption and engineering investment.
Excellent Fire Resistance & High Safety Factor
All metal raw materials are non-combustible Class A material, will not burn or release toxic smoke when fire occurs, effectively block flame spread, fully meet international building fire safety codes for factories and public buildings.
Energy Saving Thermal Insulation & Noise Reduction Option
Match rock wool / glass wool insulation layer and sound-absorbing underlayment, lower indoor temperature in summer and retain heat in winter to reduce air conditioning & heating costs; eliminate heavy rain tapping noise on metal surface for office and school buildings.
100% Water Tight Hidden Seam Design, Less Leakage Risk
Standing seam system has zero exposed screw holes on roof surface, equipped with full set of integrated sealing accessories such as ridge caps, valley flashings and butyl sealing tapes. All roof nodes form closed waterproof layers to solve common leakage issues of traditional metal roofs.
Quick On-site Installation, Short Construction Period
Panels are pre-cut in factory according to project size, standardized matching accessories, simple assembly process. Construction speed is 3–5 times faster than concrete and tile roofing, shorten project delivery cycle for investors.
Rich Color & Curved Customization, Beautiful Architectural Appearance
Dozens of standard coating colors available, support customized color; aluminum magnesium manganese alloy panels can be cold-bent into arc, hyperbolic shapes to realize complex curved roof design for stadiums and exhibition halls.
Environment Friendly & Fully Recyclable Raw Materials
Steel and aluminum alloy metal panels can be 100% recycled after service life, no construction solid waste pollution. Low carbon production process, meets LEED and green building certification standards.
Low Daily Maintenance Cost, Simple Upkeep Work
Surface anti-fouling PVDF coating resists dust and moss growth. Only annual simple inspection for sealing tapes and fasteners, no frequent repainting or large-area repair work required.
Parameter Item | Details |
|---|---|
Standard Installation Method | Standing Seam Locking Installation, Exposed Screw Fastening Installation, Concealed Clip Installation, Dry-hanging Installation; 100% Dry Work, No On-site Wet Work |
Matching Accessories | Full Set of Matching Purlin, Fasteners, Clips, Washers, Sealant Strips, Waterproof Caps, Flashing, End Caps, Gutter, Downspout, Insulation Board |
Adapted Roof Base | 100% Compatible with Steel Structure Purlin, Concrete Roof Base, Wooden Roof Base, Existing Roof Renovation Base, Insulation Board Base in the Market |
Adapted Building Types | Steel Structure Factory Workshop, Warehouse, Commercial Building, Residential House, Public Facility, New Energy Power Station, Marine/Offshore Engineering |
Installation Efficiency | 50% Faster Than Traditional Tile & Concrete Roof Systems, 2 Workers Can Complete 100㎡ Panel Installation Within 1 Day |
Maintainability & Repairability | Modular Design, Single Damaged Panel Can Be Replaced Independently Without Disassembling the Whole System; No Need for Large-scale Roof Removal During Maintenance |
Compatibility | Fully Compatible with Mainstream Roof Insulation System, Waterproof System, Solar Panel Mounting System, Green Roof System, No Need to Adjust the Original Building Design |
Scenario Category | Specific Applications |
|---|---|
Industrial Buildings | Factory Workshop, Production Plant, Industrial Warehouse, Logistics Center, Cold Storage, Clean Room, Industrial Park Roof |
Commercial & Service Buildings | Shopping Mall, Exhibition Hall, Auto 4S Shop, Hotel, Office Building, Restaurant, Coffee Shop, Commercial Complex Roof |
Residential Buildings | Villa, Apartment, Townhouse, Residential Community, Rural Self-built House, Holiday House Roof & Renovation |
Public & Municipal Buildings | School, Hospital, Gymnasium, Stadium, Airport Terminal, Railway Station, Bus Station, Government Office Building, Park & Garden Facility Roof |
New Energy & Special Engineering | Solar Power Station Roof, Wind Power Plant Supporting Building, Energy Storage Power Station, Lithium Battery Factory, Offshore Platform, Marine Engineering Roof |
Special Scenarios | Coastal Corrosion-resistant Buildings, High-altitude Steel Structures, Cold Region Low-temperature Resistant Engineering, Clean Workshop, Dust-free Room, Fire-resistant & Explosion-proof Workshop, Agricultural Greenhouse, Breeding Workshop Roof |