Views: 0 Author: Site Editor Publish Time: 2026-10-12 Origin: Site
Steel framing systems are essential to the structural performance, stability, and functionality of industrial and commercial buildings. A complete steel building is not simply assembled from columns and beams; it consists of interconnected structural components designed to transfer loads, support building envelopes, and maintain overall stability.
In most industrial steel buildings, the framing system can be divided into two major categories: primary steel framing and secondary steel framing.
Primary framing provides the main load-bearing structural framework, while secondary framing supports roof and wall systems and transfers loads to the primary members. Both systems must be coordinated with structural connections, bracing arrangements, and project-specific engineering requirements.
Understanding their differences helps contractors, engineers, and international procurement teams specify suitable structural components and manage steel building projects more effectively.
Primary steel framing refers to the main structural members responsible for carrying significant building loads and transferring them toward the foundations.
In a typical industrial steel building, the primary framing system may include steel columns, rafters, beams, girders, and major truss assemblies.
These components form the principal load-bearing skeleton of the building.
Steel Columns
Steel columns are vertical load-bearing members that support roof or floor structures and transfer forces to the foundations.
Depending on the design, columns may use hot-rolled sections, welded built-up sections, or other engineered profiles.
Steel Beams and Girders
Steel beams and girders support roof structures, floor systems, and other structural elements.
Their dimensions and section types are determined according to loading conditions, span requirements, and serviceability criteria.
Steel Rafters
Rafters are commonly used in portal frame buildings to form the main roof-supporting framework.
They may be fabricated using constant-depth or tapered steel sections.
Steel Trusses
Steel trusses consist of interconnected members designed to transfer loads primarily through axial forces.
They are frequently used in long-span roof systems and other applications requiring engineered structural configurations.
The primary framing system is responsible for:
Supporting major roof and floor loads
Transferring structural forces toward the foundations
Providing the principal building framework
Contributing to resistance against applicable lateral actions
Maintaining required strength, stiffness, and structural performance
Primary framing must be designed according to the project's loading conditions, geometry, and applicable structural standards.
Secondary steel framing consists of structural members that support roof coverings, wall cladding, and other building elements while transferring loads to the primary structural framework.
Although secondary members are generally smaller than primary members, they remain essential to building performance and may also provide engineered restraint to other structural components.
Roof Purlins
Roof purlins are horizontal or inclined members installed between primary roof frames.
They support roof sheeting and transfer loads to rafters, trusses, or other primary members.
Common profiles include C-section and Z-section steel purlins.
Wall Girts
Wall girts are horizontal framing members that support wall cladding and transfer wind and other applicable loads to the primary structure.
Their size and spacing depend on wall system requirements and structural design.
Eave Struts
Eave struts are installed near the intersection of roof and wall systems.
Depending on the design, they may support roof edges, wall cladding, and associated structural or enclosure components.
Sag Rods and Bridging Components
Sag rods, bridging systems, and other restraint components may be installed to control secondary member movement and provide restraint where required.
Their effectiveness depends on the complete restraint arrangement and connection details.
Secondary framing typically provides:
Support for roofing and wall cladding
Transfer of local loads to primary structural members
Attachment points for building envelope components
Structural restraint where specifically designed
Support for coordinated roof and wall configurations
Secondary members should not be treated as nonstructural accessories. Their strength, connections, and stability require appropriate engineering consideration.
Primary and secondary steel framing systems perform different but complementary functions.
Comparison |
Primary Steel Framing |
Secondary Steel Framing |
|---|---|---|
Main Function |
Supports principal building loads |
Supports roof and wall systems |
Typical Components |
Columns, beams, rafters, trusses |
Purlins, girts, eave struts |
Common Sections |
Hot-rolled or fabricated steel sections |
Cold-formed C/Z sections and other profiles |
Load Transfer |
Transfers forces toward foundations |
Transfers loads to primary members |
Structural Role |
Main load-bearing framework |
Local support and engineered restraint |
Design Focus |
Overall strength, stiffness, stability |
Local loading, deflection, restraint, connections |
The classification depends on the member's actual function within the structural system. Some members may perform multiple structural roles.
Primary and secondary framing must function as an integrated structural system.
For example, in a typical steel warehouse, roof loads are initially carried by the roof sheeting and transferred to the purlins.
The purlins then transfer these loads to the primary rafters or roof trusses.
The primary framing distributes the resulting forces through columns and supporting connections toward the foundations.
Similarly, wall cladding transfers wind actions to wall girts, which distribute those forces to the supporting structural framework.
Bracing systems play an important role in maintaining overall building stability.
Roof bracing and vertical bracing may transfer longitudinal forces to designated resisting elements and foundations.
Secondary framing members can also contribute to the restraint of primary structural members when their connections and supporting load paths are specifically engineered for this purpose.
However, purlins and girts should not automatically be assumed to provide adequate lateral restraint without structural verification.
Accurate coordination between primary framing, secondary framing, bracing, and connection systems is essential.
Both framing systems must be selected according to the building's intended use, structural requirements, and environmental conditions.
The distance between primary frames influences the required span and capacity of secondary framing members.
Increasing frame spacing may reduce the number of primary frames but can increase the demands on purlins and girts.
An efficient design should evaluate the entire framing arrangement.
Relevant design actions may include:
Structural self-weight
Roof and wall loads
Wind pressure and uplift
Snow loads
Imposed roof or floor loads
Seismic actions
Equipment loads, where applicable
Load combinations and design requirements depend on the project location and applicable standards.
Primary framing must satisfy strength and overall stability requirements.
Secondary members must also be checked for bending, deflection, local buckling, and restraint conditions.
The interaction between framing members and building envelope systems should be considered during engineering.
Connection details must provide the required load transfer between primary and secondary members.
Purlin cleats, bolted brackets, connection plates, and other assemblies should be coordinated with approved structural drawings.
Primary and secondary framing systems are widely used together in different building types.
Primary steel frames provide the main structural layout, while secondary members support roof and wall systems.
The framing arrangement can be coordinated with manufacturing equipment, internal clearance, and material handling requirements.
Steel framing systems can support large storage areas, practical column layouts, and various roofing and cladding configurations.
Secondary framing spacing should be coordinated with the selected building envelope.
Primary framing supports the building structure, while secondary framing accommodates roof and wall coverings.
Environmental exposure and corrosion protection requirements should be evaluated according to the building's use.
Primary steel beams and columns may support floors and roof structures, while secondary members provide local support for decking, cladding, or other building elements.
The framing classification and configuration depend on the engineered building system.
Accurate fabrication is important for both primary and secondary steel framing components.
Material Selection
Steel grades and section specifications should follow approved project requirements and applicable standards.
Shop Drawings
Fabrication drawings should identify member dimensions, connection details, hole locations, and component references.
Cutting and Forming
Primary members may require plate cutting, welding, drilling, and assembly.
Secondary members such as C and Z purlins are commonly manufactured through cold-forming processes.
Connection Accuracy
Bolt holes, cleats, plates, and other connection interfaces must be manufactured according to the specified tolerances.
Surface Protection
Protective coatings or galvanizing may be required according to the service environment and project specifications.
Inspection and Identification
Dimensional inspection, material verification, and component identification help support consistent fabrication and site assembly.
For international procurement, accurate technical information is essential.
Customers should provide:
Project location and building application
General arrangement drawings
Primary frame dimensions and layout
Steel member specifications
Purlin and girt profiles, thicknesses, and spacing
Bracing and restraint requirements
Connection details
Material grades and applicable standards
Surface treatment specifications
Required fabrication and delivery scope
A clearly defined supply scope also helps distinguish structural framing components from roofing, wall cladding, fasteners, and other building materials.
At ZSJHSTEELGROUP, we understand that reliable steel building supply requires coordination between primary structural members, secondary framing components, connection details, and project delivery requirements.
We focus on supporting international customers with project-oriented steel product sourcing and customized fabrication supply coordination.
Our approach emphasizes:
Customized Steel Components: Coordinating primary and secondary framing products according to approved specifications.
Technical Drawing Coordination: Supporting clear communication of member dimensions, connection interfaces, and fabrication requirements.
Manufacturing and Quality Coordination: Aligning product supply with defined manufacturing and inspection requirements.
International Supply Solutions: Coordinating component identification, packaging, and export delivery requirements.
Our goal is to help overseas contractors and procurement teams source suitable structural steel products for their specific construction projects.
Primary framing forms the main load-bearing structural framework, while secondary framing supports roof and wall systems and transfers loads to primary members.
Both are structural systems and must be engineered for their intended functions.
Yes. Roof purlins are generally classified as secondary framing members because they support roofing and transfer loads to primary roof structures.
Secondary framing can provide restraint or contribute to stability when specifically designed and connected for that purpose.
It should not be assumed to provide adequate restraint without engineering verification.
Yes. Member dimensions, steel grades, connection details, profiles, and protective finishes can be specified according to approved engineering drawings and project requirements.
A reliable steel building requires effective coordination between primary framing, secondary framing, bracing systems, and structural connections.
Whether your project involves an industrial workshop, warehouse, logistics facility, or customized steel building, accurately specified structural components are essential for successful fabrication and installation.
ZSJHSTEELGROUP supports international customers with customized structural steel sourcing and project-oriented supply coordination.
Share your project drawings, member specifications, required quantities, and delivery destination with our team.
Contact ZSJHSTEELGROUP to discuss your steel framing requirements and request a project-specific quotation.