| Availability: | |
|---|---|
| Quantity: | |
ZSJH STEEL
Specification | Reference options and order details |
Service | State gravity or pumped flow and provide the media, pH range and temperature if known. |
Standard | Specify EN 598 or ISO 7186 when called for, with the project edition and acceptance requirements. |
Size and duty | Specify DN and quantity. Reference order lengths: 5.7 m or 6.0 m where available. Confirm effective laying length, cut lengths and packing. For pumped service give design, surge and test pressures. |
Lining and coating | Compare Portland or high-alumina cement mortar, or a specified ceramic-filled epoxy system, against the wastewater chemistry. ISO 4179 applies to cement mortar lining. |
External protection | Specify sprayed metallic zinc mass in g/m² (e.g. ≥130 if permitted by the project specification) and a compatible bituminous, epoxy or PU finish. Confirm the complete coating system and finish thickness. |
Joints and documentation | Specify push-on or restrained joints where called for, gasket material, fittings and approval reports. Confirm deflection and restraint from the selected system. |
External gravity sewers, wastewater pumping mains and treatment-plant transfer lines where the project specifies ductile iron.
Ductile iron pipe body. Spheroidal graphite gives the casting ductility. Confirm burial loads and pump transients for the actual route.
Lining matched to the wastewater. Compare mortar and specialty lining data for the stated pH and temperature. Use the lined bore for hydraulic calculations.
Coordinated joints and fittings. Confirm gasket compatibility, allowable joint deflection and matching ends before ordering.
Quote straight pipe, with matching fittings and gaskets as listed. Confirm inspection records, packing and shipment against the order.
Can the same lining be used for every sewer?
Confirm lining and gasket suitability for the wastewater and exposure conditions. Include any industrial discharge data with your enquiry.
Can bends and reducers be quoted together?
Send the fitting schedule with sizes, joint ends and lining requirements so the quote can list them alongside the pipe.
Send the pipe and fitting schedule, service conditions, inspection requirements and delivery port.
content is empty!