| Availability: | |
|---|---|
| Quantity: | |
ZSJH
The railing dimensions, post spacing, mounting method and connection details can be customized according to structural drawings and actual site conditions. This helps the finished system integrate accurately with steel platforms, stairs, walkways and building structures.
Handrail posts, rails, base plates, anchors and welded connections can be designed according to the specified project loads. Structural calculations and connection details may be developed when required by the project.
Available options include custom railing height, tube diameter, wall thickness, post spacing, panel length and base-plate configuration. A commonly requested railing height is approximately 1100 mm, but the final dimensions should follow the applicable project requirements.
Components are manufactured under controlled workshop conditions to improve dimensional consistency, welding quality and surface-treatment performance.
Prefabricated handrail sections reduce cutting and welding work on site. Numbered components, prepared connection points and coordinated installation drawings can simplify assembly and shorten installation time.
Depending on the operating environment, the railing can be supplied with hot-dip galvanizing, painted finishes, powder coating or a duplex coating system combining galvanizing and an additional protective coating.
Systems are available with base-plate mounting, side mounting, embedded mounting, socket mounting, bolted connections or welded installation.
Custom steel handrail systems are commonly used in:
Industrial access platforms and maintenance walkways
Steel stairs, stair landings and mezzanine floors
Factory production areas and equipment platforms
Warehouses and logistics facilities
Power plants and energy facilities
Petrochemical and process-industry projects
Mining and bulk-material handling facilities
Water-treatment plants and pumping stations
Ports, terminals and marine infrastructure
Bridges, elevated passages and service corridors
Commercial buildings and public facilities
Rooftop maintenance areas and restricted-access zones
Loading platforms, ramps and machinery access points

These railing systems are suitable for new construction, plant expansion, equipment upgrading and replacement projects requiring drawing-based fabrication.
Typical project types include:
Industrial steel structure projects
Pre-engineered buildings
Equipment-support structures
Manufacturing plants
Power-generation facilities
Oil, gas and chemical facilities
Mining and processing plants
Municipal infrastructure
Transportation and logistics facilities
Coastal or high-corrosion projects
Custom architectural and engineering applications
ZSJH Steel can supply individual railing components, prefabricated sections or complete railing packages based on the project scope.
The following specifications are typical reference options. Final specifications are determined by the approved drawings, loading requirements and project standards.
| Specification Item | Available Options |
|---|---|
| Product type | Handrail, guardrail, stair railing, platform railing or edge-protection system |
| Material | Carbon steel, galvanized steel or stainless steel |
| Typical railing height | 900–1200 mm; 1100 mm commonly requested |
| Main rail diameter | Customizable; 42.4 mm tubular handrail available |
| Pipe guardrail diameter | Customizable; 48.3 mm pipe option available |
| Wall thickness | Selected according to design load and project specification |
| Post spacing | Project-specific and subject to engineering verification |
| Section length | Custom-sized or modular prefabricated sections |
| Intermediate rails | Single, double or multiple horizontal rails |
| Toe board | Optional, with customized height and thickness |
| Base plate | Customized dimensions, thickness and hole layout |
| Mounting method | Top-mounted, side-mounted, embedded, socket-mounted, bolted or welded |
| Connection type | Welded, bolted, socketed, flanged or removable |
| Surface finish | Hot-dip galvanized, painted, powder-coated or duplex-coated |
| Color | Custom RAL colors available for coated products |
| Fabrication basis | Client drawings, approved shop drawings or project specifications |
| Packaging | Bundled, wrapped, crated or export-packed according to shipment requirements |
Important: Dimensions, post spacing and material thickness must be verified against the required loads, installation conditions and applicable project regulations before production.
The project team reviews the supplied drawings, design loads, dimensions, installation location, mounting method, corrosion category and applicable technical requirements.
Shop drawings are prepared or reviewed to confirm railing height, pipe size, post spacing, connection details, base plates, bolt holes, toe boards and interface dimensions.
Steel pipes, tubes, plates and profiles are selected according to the approved material specifications. Material documentation can be provided when required.
Raw materials are cut to the specified dimensions. Bending, drilling, coping and end preparation are completed using suitable fabrication equipment.
Rails, posts, base plates and connection components are assembled in controlled fixtures. Welding is performed according to the approved fabrication requirements.
Weld areas, sharp edges and fabrication marks are treated as required to produce a safe and consistent finish.
Key dimensions—including overall height, section length, post spacing, base-plate size and hole position—are inspected against the approved drawings.
The fabricated railing sections receive the specified surface protection, such as hot-dip galvanizing, painting, powder coating or a duplex coating system.
The finished products are checked for dimensions, appearance, coating condition, connection details, identification and conformity with the approved documentation.
Railing sections and accessories can be marked according to the installation drawings. Protective packaging is applied to reduce handling and transportation damage during international shipment.

Reliable protection for elevated working and access areas
Custom dimensions for complex project interfaces
Improved installation efficiency through prefabrication
Reduced need for extensive site welding and modification
Consistent component dimensions and connection locations
Flexible materials, finishes and mounting configurations
Durable performance in indoor and outdoor environments
Replaceable or removable sections available for maintenance access
Suitable for single components and complete project packages
Coordinated production based on approved engineering drawings
Export-oriented packing and component identification
Efficient integration with steel platforms, stairs and structural frames
ZSJH Steel applies inspection procedures throughout fabrication to help ensure that each railing system meets the approved project requirements.
Quality-control items may include:
Raw-material verification
Dimensional inspection
Welding appearance inspection
Base-plate and bolt-hole position checks
Trial assembly when required
Surface-preparation inspection
Coating thickness checks where applicable
Final appearance inspection
Component marking and quantity verification
Packing inspection before shipment
Additional inspection documentation can be discussed according to the project specification and contractual requirements.
Yes. Railing height, section length, pipe diameter, wall thickness, post spacing, base plates and connection details can be customized according to the project drawings.
Yes. ZSJH Steel supports drawing-based railing fabrication. We can review the supplied drawings and clarify dimensions, materials, connections and surface-treatment requirements before production.
Yes. An 1100 mm railing height is available. However, the final height must be confirmed according to the project specification and applicable local requirements.
Yes. Both 42.4 mm tubular handrails and 48.3 mm pipe guardrails can be supplied, subject to material availability and the approved design.
Post spacing depends on the required design load, railing height, pipe size, wall thickness, mounting condition and connection design. It should be confirmed through project-specific engineering rather than selected by appearance alone.
Yes. Prefabricated handrail sections can be produced according to transport limitations and installation requirements. Sections may be numbered to correspond with the erection drawings.
Yes. Socket-mounted, bolted and other removable railing configurations are available for equipment access, maintenance openings and controlled working areas.
Hot-dip galvanizing is commonly selected for outdoor industrial environments. For projects requiring enhanced corrosion resistance or a specific color, a duplex-coated finish may be considered.
Yes. Toe boards, base plates, brackets, flanges, sockets, fasteners and other accessories can be supplied as part of the complete railing package.
Yes. The system can be manufactured for specified design loads. Please provide the applicable loading criteria, installation details and project standards for technical evaluation.
For an accurate quotation, please provide:
Project drawings or sketches
Required railing quantity or total length
Railing height and section dimensions
Material grade
Pipe or tube diameter and wall thickness
Required design load
Post-spacing requirements
Mounting and connection method
Surface-treatment requirements
Applicable project standards
Delivery destination and required schedule

ZSJH Steel supports projects from drawing review and structural detailing through material procurement, fabrication, surface treatment, inspection, packing and international delivery.
Rather than supplying only standard railing sizes, we manufacture according to project-specific drawings, dimensions and installation interfaces.
Our production capabilities cover material preparation, cutting, drilling, forming, welding, assembly and surface finishing for customized steel components.
Inspection is carried out at key production stages to control dimensions, weld appearance, connection accuracy and coating condition.
We support customized orders for industrial projects, including different section sizes, connection methods, coating systems and prefabrication requirements.
ZSJH Steel understands the requirements of international projects, including drawing coordination, product marking, packing, documentation and shipping arrangements.
In addition to handrail systems, ZSJH Steel can supply structural steel members, platforms, stairs, secondary steelwork, connection components and other fabricated steel products for coordinated project procurement.
Looking for a custom-sized, load-rated steel handrail system for your project?
Send ZSJH Steel your drawings, required dimensions, design loads, material specifications, surface-treatment requirements, order quantity and delivery destination. Our team will review the project information and provide a tailored fabrication proposal and quotation.
Contact ZSJH Steel today to discuss your industrial handrail, platform guardrail or engineered edge-protection requirements.
ZSJH Steel — Connecting the World · Building the Future Together.
content is empty!