Views: 0 Author: Site Editor Publish Time: 2026-11-10 Origin: Site
Purlins in steel structures are secondary structural members that support roof cladding and transfer roof loads to the primary steel framework. They are commonly manufactured as cold-formed C-shaped or Z-shaped steel sections and are widely used in industrial warehouses, manufacturing workshops, agricultural buildings, and pre-engineered steel buildings.
Although purlins are smaller than main steel beams and columns, they are essential to the performance of the roof structure.
Their section dimensions, spacing, connections, and restraint arrangements must be coordinated with the primary framing system and the specified roof loads.
Table of Contents
A steel purlin is a secondary member installed between primary roof-supporting elements, such as rafters or trusses.
Its principal function is to support roof sheeting and transfer the resulting loads to the main structural framework.
In many industrial steel buildings, purlins are arranged along the length of the building at specified intervals across the roof slope.
Typical roof loads include:
Roof cladding self-weight
Insulation and associated roofing materials
Snow loads where applicable
Wind pressure and uplift
Maintenance and construction loads specified by the design
The purlin section, span, spacing, and connections are determined according to these loading requirements.
The two commonly used cold-formed purlin profiles are C-shaped purlins and Z-shaped purlins.
C purlins have a channel-shaped cross-section with a web and two flanges, often incorporating edge lips for additional sectional stiffness.
They are widely used in roof and wall secondary framing.
Common characteristics:
Straightforward connection arrangements
Suitable for a variety of simply supported or engineered continuous configurations
Commonly used for shorter secondary framing spans
Compatible with prefabricated roof and wall construction
C purlins may also be used as wall girts where appropriate.
Z purlins have an offset cross-section resembling the letter Z.
Their geometry can facilitate overlapping connections over supporting frames in suitable continuous purlin arrangements.
Common characteristics:
Suitable for lapped continuous purlin systems
Can provide efficient load distribution when appropriately designed
Frequently used in industrial roof construction
Available in various depths, thicknesses, and lengths
Z purlins are often specified for large industrial roofs where continuous secondary framing can provide structural and fabrication advantages.
Feature | C Purlin | Z Purlin |
|---|---|---|
Cross-Section | C-shaped channel | Z-shaped section |
Typical Connection | Bolted cleats or specified supports | Cleats and potentially lapped connections |
Common Structural Arrangement | Simply supported or continuous | Simply supported or lapped continuous |
Typical Application | Roofs, wall girts, secondary framing | Industrial roofs and continuous purlin systems |
Fabrication | Cold-formed steel section | Cold-formed steel section |
Main Design Consideration | Span, bending, stability, and connection | Span, continuity, stability, and lapping details |
Neither profile is universally stronger or more economical.
Performance depends on the actual cross-section, steel grade, thickness, span arrangement, restraint conditions, and loading.
In a typical steel structure, the roof load transfer process follows this general sequence:
Roof Cladding → Steel Purlins → Primary Rafters or Trusses → Steel Columns → Foundations
Roof cladding receives loads from its self-weight and environmental actions.
Purlins support the cladding and transfer those loads to the primary roof structure.
Primary rafters or trusses then transfer the resulting forces through the main structural system to the building foundations.
This is a simplified gravity load path. Wind uplift and other actions may produce different forces and connection demands.
The roof structure must therefore be designed as a coordinated system rather than a collection of independently selected components.
Purlins may require additional lateral or torsional restraint to achieve their intended structural performance.
Tie rods, sag rods, bridging members, or other engineered restraint components can be used depending on the purlin system.
A tie rod may connect adjacent purlins and form part of a restraint arrangement designed to control specified lateral movement.
Tie rod assemblies can assist with maintaining the intended spacing or alignment of secondary framing members when incorporated into the structural design.
Properly detailed restraint can contribute to the stability of purlins, but the restraint capacity and load-transfer path must be verified.
Read our detailed guide on tie rods in steel structures to understand the components, connections, and applications of these supporting members.
Purlins and roof bracing are related components, but they do not necessarily perform the same structural role.
Purlins primarily support roofing materials and transfer loads to the primary steel frame.
Roof bracing provides designated structural restraint or transfers lateral forces through the roof structural plane.
Depending on the engineering design, selected purlins or additional struts may participate in the transfer of bracing forces.
However, secondary framing should not automatically be treated as a complete lateral force-resisting system.
Our article on roof bracing versus wall bracing explains how these systems work together to support overall building stability.
ZSJH Steel Group supplies roof and wall purlin products with customizable dimensions and protective finishes.
The following are examples of product configurations.
Parameter | Product Reference |
|---|---|
Profile Type | C-shaped and Z-shaped |
Common C Series | C80, C100, C120, C140, C160, C180, C200 |
Common Z Series | Z100, Z120, Z140, Z160, Z180, Z200 |
Material | Structural steel according to project requirements |
Typical Manufacturing Method | Cold roll forming |
Surface Finish | Galvanized or specified protective finish |
Connection Features | Pre-punched holes where required |
Customization | Profile size, thickness, length, and hole positions |
Actual section sizes and loading capacities should be verified against the relevant product specification and approved structural design.
Explore the Roof & Wall Purlin product range for available specifications and customization options.
Purlins support roof panels over the primary steel framework and can accommodate different roofing systems.
Workshop roofs may include ventilation equipment, roof openings, and other building services that influence purlin layout.
PEB systems commonly integrate prefabricated purlins with primary steel frames, bracing, and cladding.
Steel purlins are used in barns, storage facilities, and agricultural processing buildings where lightweight roof framing is required.
Purlins can support roofing systems in commercial and other steel-framed facilities.
The specific purlin arrangement varies with building geometry, roof loads, and structural requirements.
Learn more about the different types of steel structures and how secondary framing is incorporated into each system.
Several factors influence the performance of a purlin system.
Incorrect Purlin Spacing
Purlin spacing affects roof sheeting support, load distribution, and structural performance.
Insufficient Lateral Restraint
Where lateral or torsional restraint is required, missing or incorrectly installed restraint components can reduce structural capacity.
Connection Misalignment
Incorrect bolt-hole locations or connection dimensions may create installation difficulties.
Improper Lapping Details
Z purlin overlaps must follow the designed lap length, bolt arrangement, and connection requirements.
Inadequate Corrosion Protection
Roof purlins in humid or corrosive environments may require enhanced protective finishes.
Unverified Additional Loads
Solar panels, suspended services, and new rooftop equipment should not be added without evaluating the resulting structural loads.
The structural requirements of purlins can vary considerably between industrial facilities.
A logistics warehouse may require a large roof area with coordinated framing bays, while a manufacturing workshop may require special openings or suspended services.
Heavy-duty facilities may incorporate larger roof loads or more complex structural interfaces.
Our article on industrial steel structure applications explains how these operational requirements influence the overall building system.
A purlin supports roof cladding and transfers roof loads to the primary steel rafters or trusses.
Purlins are generally roof secondary members, while girts are wall secondary members that support wall cladding.
Neither is universally better. C and Z profiles have different connection and structural characteristics. Their suitability depends on span, loading, restraint, and engineering requirements.
Some purlin systems require tie rods or other restraint components. The need and arrangement depend on the engineered structural design.
Yes. Purlins can be manufactured in specified section dimensions, lengths, thicknesses, and hole configurations according to approved drawings.
A reliable roof structure depends on the coordinated design and fabrication of purlins, primary steel members, connections, and supporting components.
ZSJH Steel Group supplies steel structure systems and related components for industrial and commercial building projects.
Explore our Steel Structure System or contact our team with your purlin layout drawings, required profiles, quantities, and delivery requirements to discuss your project.
content is empty!