| Availability: | |
|---|---|
| Quantity: | |
ZSJH STEEL
Item | What to specify |
Standard and grade | ASTM F3125/F3125M Grades A325 and A490 are U.S. specification examples. For metric orders, provide the assembly standard and any required ISO 898-1 property class, such as 8.8 or 10.9. |
Dimensions and threads | Provide diameter × length for each item, with units and any thread requirements. Example enquiry format: 3/4 in × 2-1/2 in, 500 sets. |
Nuts and washers | List the required nut grade and washer standard, type and quantity for each bolt set. |
Surface finish | Specify plain or the required coating. If hot-dip galvanizing is specified, confirm that the selected grade permits it and that the hardware is compatible. |
Marking and documents | Specify product markings, lot traceability and required inspection documents, including EN 10204 3.1 where applicable. |
Quantities and packing | List complete sets by line item. Identify any packing by erection area or shipment batch. |
Heavy hex structural bolts are used in steel-to-steel connections specified on project drawings. Typical applications include beam end plates, beam and column splices, and bracing connections in warehouses, industrial buildings and equipment platforms.
How do A325 and A490 differ?
A490 has a higher specified minimum tensile strength. Use the grade shown on the approved drawings and confirm any proposed substitution with the project engineer.
How many washers are included?
Washer type and count follow the connection detail and project specification. The quotation should show the hardware included in each set.
Can I request lot-specific test reports?
List the required reports and traceability requirements when you enquire so their availability can be confirmed in the quotation.
Send your bolt schedule or bill of materials, required finish, inspection documents and delivery destination. For phased erection, include your packing or delivery breakdown.
content is empty!