| Availability: | |
|---|---|
| Quantity: | |
ZSJH
Stair width, total rise, tread dimensions, landing arrangement, stringer configuration and connection details can be manufactured according to approved project drawings.
Different tread options are available for various building and industrial applications:
Steel pans prepared for site-applied concrete
Diamond or checker plate treads
Steel grating treads
Serrated grating treads
Formed steel plate treads
Project-specified finished tread systems
Closed-riser steel staircases provide a continuous stair profile and are commonly used in commercial, institutional and architectural building projects.
Plate stringers provide rigid structural support and a clean side profile. They can be laser-cut, drilled and fitted with tread supports according to the approved stair geometry.
Steel pan treads are formed under controlled workshop conditions to improve consistency in tread depth, riser height and edge alignment.
Where transportation dimensions permit, stair flights can be assembled in the factory with stringers, pans, brackets and connection plates. This reduces fabrication work at the project site.
Available surface treatments include primer coating, industrial painting, powder coating, hot-dip galvanizing and duplex coating systems.
Base plates, landing connections, wall brackets, beam interfaces and bolted splice plates can be fabricated to coordinate with the supporting structure.
Custom steel pan stairs are commonly used in:
Commercial buildings
Office buildings
Shopping centers
Hotels
Schools and educational buildings
Hospitals and healthcare facilities
Parking structures
Apartment buildings
Industrial plants
Warehouses and logistics centers
Manufacturing facilities
Equipment platforms
Pipe and conveyor crossover routes
Mezzanine floors
Modular and skid-mounted equipment systems
Building renovation and expansion projects

Powder-coated steel stair systems can provide a clean architectural appearance for office buildings, retail facilities and other commercial interiors.
Steel pan stairs can be prepared for site-applied concrete infill, creating a robust stair solution suitable for many commercial and structural building projects.
Diamond plate or grating treads can be used in factories, warehouses and production facilities requiring durable access between working levels.
Steel crossover access stairs provide an elevated route over pipelines, conveyors, cable trays or process equipment without interrupting the operating area below.
Compact stair units can be integrated with modular process equipment, packaged plants and skid-mounted systems.
Custom shop-assembled metal stair flights can be fabricated for existing buildings where the new staircase must coordinate with established floor elevations and limited installation space.
The following specifications represent common manufacturing options. Final specifications should be determined by approved drawings, required loads and applicable project requirements.
| Specification Item | Available Options |
|---|---|
| Product type | Steel pan stair, closed-riser stair, plate stringer stair or crossover stair |
| Main material | Carbon structural steel, galvanized steel or stainless steel |
| Stair arrangement | Straight, L-shaped, U-shaped, switchback or crossover |
| Stair width | Customized |
| Total rise and run | According to project dimensions |
| Stringer type | Plate stringer, channel stringer or fabricated section |
| Tread type | Steel pan, diamond plate, checker plate, grating or formed plate |
| Riser configuration | Open or closed |
| Concrete infill | Site-applied when specified |
| Landing | Top, bottom or intermediate landing available |
| Handrail | Tubular, square-section or project-specified design |
| Guardrail | Single, double or multi-rail configuration |
| Toe board | Optional |
| Connection method | Bolted, welded or combined |
| Support method | Floor-mounted, beam-supported, wall-connected or skid-mounted |
| Surface treatment | Primer, paint, powder coating, galvanizing or duplex coating |
| Color | Custom RAL colors available |
| Prefabrication | Components, modular sections or shop-assembled stair flight |
| Fabrication basis | Approved shop drawings and project specifications |
| Packing | Bundled, wrapped, crated or export-packed |
A complete steel pan stair system may include:
Plate or channel stringers
Formed steel tread pans
Closed steel risers
Diamond plate or grating treads
Landing frames
Landing deck plates
Tread support angles
Handrails and guardrails
Toe boards
Base plates
Connection plates
Wall or beam brackets
Bolted splice plates
Anchor interfaces
Installation fasteners
The supply scope can be adjusted according to the customer’s procurement requirements.

These treads consist of formed steel pans manufactured to receive concrete at the project site. Pan depth, plate thickness and edge details are produced according to approved drawings.
Diamond plate treads offer a durable textured steel surface for industrial and maintenance applications.
Open steel grating provides drainage and ventilation, making it suitable for wet, dusty or outdoor areas.
Closed tread-and-riser arrangements provide a continuous appearance and may be selected for indoor architectural or commercial applications.
Steel structures can also be prepared to receive project-specified finishes, subject to approved connection and support details.
ZSJH Steel reviews the architectural and structural drawings, stair dimensions, loading requirements, tread type, building interfaces and surface-treatment specifications.
Shop drawings are prepared or reviewed to confirm:
Total stair rise and run
Tread depth and riser height
Stair width
Stringer dimensions
Steel pan geometry
Landing elevations
Handrail arrangement
Connection and anchor details
Building interface dimensions
Steel plates, profiles, tubes and connection components are selected according to the approved material requirements.
Stringer plates, tread components, brackets and connection plates are cut and drilled according to the fabrication drawings.
Tread pans and closed risers are formed using controlled bending equipment. The formed components are checked for width, depth, angle and dimensional consistency.
Plate or channel stringers are prepared according to the approved stair geometry. Tread-support locations and connection points are accurately positioned.
Stringers, stair pans, risers, landing frames, brackets and base plates are assembled using suitable fixtures. Welding is performed according to the approved fabrication requirements.
Handrail tubes, posts and intermediate rails are cut, formed and assembled to match the stair flight and landing geometry.
Complex or modular stairs may be trial-assembled to check the fit between stair flights, landings, handrails and support components.
Important dimensions are checked against the approved drawings, including:
Overall stair width
Tread depth
Riser height
Stair slope
Stringer alignment
Landing dimensions
Bolt-hole locations
Handrail height and alignment
Building connection interfaces
Steel surfaces are cleaned and prepared according to the selected coating system.
The components receive the specified primer, paint, powder coating, hot-dip galvanizing or duplex finish.
The completed stair system is inspected for dimensions, connection accuracy, welding appearance, surface condition and component quantity.
Stair flights, handrails, landings and accessories can be labeled according to the erection drawings. Protective packaging is applied for transportation and international shipment.
Custom dimensions for different building layouts
Accurate formed-steel pan geometry
Suitable for site-applied concrete infill
Closed-riser and open-riser options
Multiple tread materials available
Strong and clean plate-stringer construction
Factory assembly reduces site fabrication
Bolted connections simplify installation
Powder-coated finishes support architectural applications
Galvanized finishes are available for outdoor environments
Compact crossover designs fit restricted industrial spaces
Coordinated landings and handrails are available
Suitable for new construction and renovation projects
Can be supplied with other structural steel components

ZSJH Steel applies inspection procedures throughout material preparation, fabrication, coating and packing.
Quality-control items may include:
Raw-material verification
Plate and profile dimension checks
CNC cutting accuracy
Stringer geometry inspection
Steel pan dimensions
Tread and riser spacing
Landing dimensions
Bolt-hole position
Connection plate alignment
Welding appearance
Trial-assembly fit
Handrail geometry
Surface-preparation checks
Coating condition and thickness where applicable
Component marking
Packing and quantity verification
Project-specific documentation and third-party inspections can be discussed before production.
A steel pan staircase uses formed steel tread pans supported by steel stringers. The pans may serve as finished steel treads or be prepared for site-applied concrete filling, depending on the project design.
ZSJH Steel manufactures the steel pan stair structure. Concrete is generally placed at the construction site after installation. Concrete design, reinforcement and placement should follow the approved project requirements.
Yes. We provide drawing-based fabrication and can manufacture stair flights, landings, handrails and connections according to approved project drawings.
Yes. Closed steel risers can be incorporated into pan stairs, plate stairs and concrete-fill stair systems.
Common options include plate stringers, channel stringers and fabricated steel sections. The final selection depends on stair geometry, loading requirements and architectural preferences.
Yes. Diamond or checker plate treads can be supplied for industrial stairs, compact access units and maintenance platforms.
Yes. Powder-coated finishes are available in customized RAL colors. The selected coating should match the indoor environment and project appearance requirements.
A crossover stair provides an elevated walking route over pipelines, conveyors or equipment. It typically includes two short stair flights, a guarded platform and a supporting steel frame.
Where transport dimensions allow, the stair flight may be shipped as a shop-assembled unit. Larger stairs are normally divided into manageable sections.
Yes. Landings, support frames, handrails, guardrails, toe boards and connection components can be included in the supply scope.
Yes. Outdoor stairs can be supplied with hot-dip galvanizing or another suitable protective coating. The surface-treatment system should be selected according to the project environment.
Please provide:
Architectural or structural drawings
Stair quantity
Total rise and available run
Stair width
Tread and riser dimensions
Tread type
Stringer type
Landing arrangement
Material grade
Design loads
Handrail requirements
Connection details
Surface treatment
Applicable project requirements
Delivery destination
Required delivery schedule
We fabricate steel stairs according to approved project drawings, helping ensure accurate dimensions and reliable coordination with the supporting building structure.
ZSJH Steel manufactures stringers, steel pans, treads, landings, handrails, support frames and connection components as an integrated package.
Factory forming and inspection help maintain consistent tread dimensions, riser geometry and edge alignment.
Steel pan, concrete-fill, diamond plate, grating and powder-coated stair solutions are available for different commercial and industrial applications.
Important dimensions, connections, welds and finishes are inspected during production to reduce installation difficulties.
In addition to steel stairs, ZSJH Steel can manufacture platforms, beams, columns, handrails, brackets and other fabricated structural steel components.
Components can be marked, packed and organized according to erection requirements for efficient international transportation and site installation.
Our services cover technical review, material procurement, fabrication, surface treatment, inspection, packing and international delivery.
Looking for custom steel pan stairs, concrete-fill stair pans, plate stringer stairs or industrial crossover access systems?
Send ZSJH Steel your drawings, required dimensions, material specifications, tread type, design loads, connection details, surface-treatment requirements, order quantity and delivery destination.
Our team will review your project information and prepare a tailored manufacturing proposal and quotation.
Contact ZSJH Steel today for custom steel stairs and complete structural access solutions.
ZSJH Steel — Connecting the World · Building the Future Together.
content is empty!