| Availability: | |
|---|---|
| Quantity: | |
ZSJH
The electrolytic zinc-deposition process produces a fine, consistent surface without the visible spangle normally associated with some hot-dip galvanized products. This makes the material suitable for applications with demanding appearance and finishing requirements.
The electroplating process enables controlled zinc deposition. Depending on the applicable standard and confirmed supply route, equal, differential or single-side coating arrangements may be available.
A suitable cold-rolled substrate can support bending, stamping, drawing and other precision fabrication processes. The final forming capability depends on the selected steel grade, component geometry and processing conditions.
Electro-galvanized steel is widely used for welded sheet-metal components. Welding current, electrode force, welding time and electrode maintenance should be adjusted according to material thickness and coating condition.
After appropriate cleaning and pretreatment, the smooth zinc-coated surface can be used for painting, powder coating, phosphating or other finishing systems.
Controlled cold-rolled substrate and precision finishing support stable thickness, flatness and processing performance for high-volume manufacturing.

| Parameter | Available Options |
|---|---|
| Product Name | Precision Electro-Galvanized Steel Sheet |
| Product Type | Electro-zinc-coated cold-rolled steel |
| Product Form | Coil, slit strip or cut-to-length sheet |
| Substrate | Cold-rolled low-carbon steel |
| Reference Standards | EN 10152, JIS G 3313, ASTM A879/A879M or an agreed equivalent |
| Grade Examples | DC01+ZE, DC03+ZE, DC04+ZE, SECC, SECD or an agreed equivalent |
| Thickness | According to the selected grade, standard and confirmed mill capability |
| Width | Standard or customized, subject to production confirmation |
| Sheet Length | Cut to the agreed order dimensions |
| Zinc Coating | Specified by the applicable electro-zinc coating designation |
| Coating Arrangement | Equal two-side, differential or single-side coating, subject to availability |
| Surface Appearance | Smooth matte or agreed commercial finish |
| Surface Treatment | Oiled, phosphate-treated, passivated, chromate-free or anti-fingerprint options, subject to confirmation |
| Edge Condition | Mill edge or slit edge |
| Coil Inside Diameter | According to the confirmed supply specification |
| Coil Weight | According to handling and transportation requirements |
| Packaging | Standard seaworthy export packaging |
| Inspection Documents | Available according to the agreed order and documentation requirements |
All grades, dimensions, coating designations and surface treatments must be confirmed against the applicable standard and ZSJH’s final quotation. Grade names belonging to different standards should not be treated as automatically interchangeable.
The zinc coating is deposited electrolytically onto a properly cleaned cold-rolled steel surface. This process creates a relatively smooth and controlled protective layer while preserving the dimensional accuracy and surface quality of the substrate.
Unlike hot-dip galvanizing, electro-galvanizing does not immerse the finished strip in molten zinc. Its surface is normally smoother and more suitable for precision fabrication and decorative finishing. However, the electro-zinc layer usually offers less corrosion reserve than heavier hot-dip galvanized coatings.
Where improved paint adhesion is required, phosphate treatment or another compatible pretreatment may be selected. Passivation, oiling and anti-fingerprint treatments can also be considered according to storage, transportation and processing requirements.
Cold-rolled steel is selected according to the required mechanical properties, forming level, surface condition and applicable material standard.
Oil, residue and surface contamination are removed to prepare the steel strip for uniform electrochemical zinc deposition.
The cleaned strip passes through controlled electrolytic coating sections. Zinc is deposited onto the required surface or surfaces according to the ordered coating arrangement.
Residual processing solution is removed, and the coated strip is dried under controlled conditions.
Depending on the order, the surface may receive oiling, phosphating, passivation, anti-fingerprint treatment or another agreed finishing treatment.
The strip may be leveled or tension-leveled to improve flatness and processing consistency.
The finished material is processed into coils, slit strips or flat sheets according to the confirmed dimensions.
Inspection may include dimensions, surface appearance, coating designation, flatness and other properties required by the applicable standard and purchase agreement.
The material is protected using moisture-resistant wrapping, edge guards, steel straps and suitable supports for transportation.

Smooth, consistent zinc-coated appearance
Suitable for precision stamping and sheet-metal fabrication
Good resistance spot-welding performance with proper process settings
Compatible with painting and powder-coating systems after suitable pretreatment
Available in coil, slit strip and cut-sheet formats
Customizable grade, dimensions and surface treatment
Suitable for components requiring clean appearance and dimensional consistency
Controlled surface condition for automated manufacturing
Reduced finishing preparation when the correct pretreatment is selected
Efficient material utilization through customized slitting and cutting
Electro-galvanized steel sheet is commonly used for:
Computer and server chassis
Electrical equipment housings
Control cabinets and switchgear enclosures
Office furniture and storage cabinets
Appliance housings and internal components
Ventilation and air-conditioning components
Cable trays and electrical accessories
Precision stamped components
Lighting housings and metal fixtures
Automotive interior or protected components
Metal partitions and indoor building products
Components requiring subsequent painting or powder coating
This product is particularly suitable for indoor or protected applications requiring a smooth surface, controlled coating, accurate fabrication and reliable secondary finishing.
For continuously wet, exposed outdoor, coastal, chemical-processing or high-corrosion environments, electro-galvanized steel should not be selected solely on appearance. The required corrosion protection must be evaluated according to the exposure category, zinc-coating designation, component design and additional paint or sealing system.
ZSJH can discuss the following options according to the project requirements:
Applicable material standard
Steel grade and forming level
Material thickness and width
Coil, slit strip or flat-sheet supply
Sheet length and dimensional tolerance
Electro-zinc coating designation
Equal, differential or single-side coating requirement
Surface appearance
Oiling or agreed passivation
Phosphate treatment
Chromate-free surface treatment
Anti-fingerprint treatment
Slitting and cut-to-length processing
Packaging and identification requirements
Availability must be confirmed according to the selected mill route, minimum order quantity and technical specification.
Electro-galvanized steel receives its zinc layer through an electrolytic deposition process and normally has a smoother, more uniform surface. Hot-dip galvanized steel is coated through a molten-zinc process and is generally available with a heavier zinc coating for applications requiring greater corrosion reserve.
It can be used in properly protected assemblies, but unpainted electro-galvanized steel is generally intended for indoor or sheltered environments. Outdoor applications require an appropriate coating designation and additional protective system selected for the actual exposure conditions.
SECC is a commonly used JIS-related designation for electro-galvanized commercial-quality cold-rolled steel. The complete grade, coating designation and surface treatment should be confirmed according to the applicable edition of JIS G 3313 and the purchase specification.
Yes. Its smooth surface is suitable for further finishing, but appropriate cleaning and pretreatment are essential for reliable coating adhesion and corrosion performance.
Yes. It is commonly processed by resistance spot welding. Welding parameters and electrode maintenance should be adjusted according to the sheet thickness, coating condition and joint design.
Appropriate drawing-grade substrates may be selected for forming applications. The steel grade must be matched to the required drawing depth, component geometry and production method.
Single-side or differential coating may be available through selected production routes. This requirement must be specified clearly and confirmed before ordering.
It should be stored indoors in a dry, clean and ventilated environment. Packaging should be protected from water ingress, condensation and corrosive substances to reduce the risk of storage staining or white rust.
Yes. Width, length, slit-strip dimensions and coil requirements can be customized within the confirmed production capability and order conditions.
Please provide the required standard, grade, thickness, width, sheet length or coil form, coating designation for each side, surface treatment, edge condition, quantity, application and destination port.

ZSJH helps customers compare material standards, forming grades, coating arrangements and surface treatments according to the intended manufacturing process and service environment.
Coils can be processed into slit strips or cut-to-length sheets according to confirmed dimensional and packaging requirements.
The material grade, standard, coating designation, surface treatment and dimensions are confirmed before production to reduce specification misunderstandings.
Material identification, dimensions, surface appearance, edge condition and packaging are checked according to the agreed inspection requirements.
Packaging can include protective wrapping, edge guards, steel straps and suitable supports to help protect the material during handling and international transportation.
The ZSJH team supports specification review, quotation preparation, order coordination, documentation and shipping arrangements.
Send ZSJH your required standard, grade, dimensions, coating designation, surface treatment, product form, quantity, application and destination port. Our team will review the specification and recommend a suitable electro-galvanized steel solution based on the confirmed production capability.
content is empty!