| Availability: | |
|---|---|
| Quantity: | |
ZSJH
Suitable for stamping and deep-drawing operations
Good ductility and forming stability
Reliable zinc corrosion protection
Reduced risk of cracking during proper forming
Smooth surface for further finishing
Suitable for complex component geometries
Consistent thickness and dimensional control
Available as coils, strips and cut sheets
Multiple drawing grades available
Custom processing and export packaging

| Parameter | Available Specification |
|---|---|
| Product Name | High-Formability Deep-Drawing Galvanized Steel Sheet |
| Product Form | Coil, slit strip or cut-to-length sheet |
| Base Material | Low-carbon cold-rolled steel |
| EN Grades | DX52D, DX53D, DX54D, DX56D or equivalent |
| JIS Grades | SGCD1, SGCD2, SGCD3 or equivalent |
| ASTM Grades | A653 FS, DDS, EDDS or agreed equivalent |
| Thickness | 0.30–2.00 mm |
| Width | 600–1,500 mm |
| Sheet Length | 1,000–6,000 mm or customized |
| Zinc Coating | Z40–Z275 g/m² |
| Surface Appearance | Minimized spangle or zero spangle |
| Surface Treatment | Chromate-free passivation, oiled, dry or anti-fingerprint |
| Edge | Mill edge or slit edge |
| Coil Inner Diameter | 508 mm or 610 mm |
| Applicable Standards | EN 10346, ASTM A653, JIS G3302 or agreed specification |
| Packaging | Standard seaworthy export packaging |
Available specifications depend on the selected steel grade, coating weight, surface treatment and order quantity. Mechanical properties must be confirmed according to the applicable material standard.
The material uses a carefully selected low-carbon steel substrate to provide the ductility required for forming operations. Controlled annealing helps develop the mechanical properties needed for bending, stamping and deep drawing.
A continuous zinc coating is applied to protect the steel substrate against oxidation. The coating condition must remain stable during deformation, while suitable lubrication and correctly designed tooling help reduce surface damage.
The appropriate steel grade should be selected according to component geometry and forming severity:
DX52D: general drawing and moderate forming
DX53D: deeper drawing and more complex shapes
DX54D: demanding deep-drawing operations
DX56D: extra-deep-drawing applications
Grade availability and final mechanical properties should be confirmed before ordering.
A suitable cold-rolled steel substrate is selected according to the required forming grade and final component geometry.
Oil, rolling residue and contaminants are removed to prepare the strip for controlled annealing and galvanizing.
The steel strip is annealed under controlled conditions to develop the required ductility, elongation and forming performance.
The annealed strip passes through molten zinc, forming a protective metallic coating on both sides.
Air knives control the coating weight and help maintain consistent zinc distribution across the strip width.
The coated strip is cooled under controlled conditions to stabilize the zinc layer and surface appearance.
When required, skin passing and tension leveling improve flatness, surface consistency and processing stability.
Chromate-free passivation, oiling or optional anti-fingerprint treatment may be applied according to forming and storage requirements.
Material thickness, width, coating weight, surface quality and mechanical properties are checked according to the agreed specification.
The finished coil can be slit into strips or cut into sheets according to customer dimensions.
The material is protected using moisture-resistant wrapping, steel straps, edge guards and suitable pallets or skids.

Suitable drawing grades allow the material to undergo controlled plastic deformation when used with appropriate tooling, lubrication and forming parameters.
The material can be selected for producing components with increased drawing depth and more complex geometries.
Controlled thickness, mechanical properties and surface quality support repeatable stamping and forming operations.
The zinc layer provides both barrier and sacrificial protection to the underlying steel.
Zero-spangle or minimized-spangle finishes provide a uniform appearance suitable for exposed parts and subsequent finishing.
Galvanized material provides corrosion protection before component forming, which can reduce the need for some post-fabrication coating processes.
The product can be supplied in coils, slit strips or cut sheets to suit different production lines.
High-formability galvanized steel is suitable for:
Automotive inner panels
Automotive reinforcement parts
Door inner panels
Brackets and mounting components
Appliance back and side panels
Washing-machine components
Refrigerator internal parts
Electrical cabinets and enclosures
Equipment housings
HVAC fittings and transitions
Ventilation components
Deep-drawn containers and trays
Stamped brackets and covers
Metal furniture components
Precision sheet-metal products
This product is intended for applications requiring:
Moderate to extra-deep drawing
Multi-stage stamping
Precision bending
Roll forming
Cold forming
Punching and blanking
Smooth formed surfaces
Zinc corrosion protection
High-volume component production
The final grade should be selected according to drawing ratio, component geometry, tooling design, lubrication, press conditions and required mechanical properties.

For reliable forming performance:
Select the appropriate drawing grade
Confirm material direction where relevant
Use suitable forming lubricants
Maintain correct die clearance
Avoid excessively small bend radii
Control blank-holder force
Prevent sharp tool edges from damaging the coating
Conduct forming trials for complex components
Repair damaged zinc coating where necessary
Confirm welding procedures before mass production
ZSJH can provide:
Grade selection assistance
Customized thickness and width
Cut-to-length processing
Coil slitting
Customized strip dimensions
Sheet leveling
Surface treatment selection
Oiled or dry supply condition
Anti-fingerprint treatment
Drawing-based material recommendations
Customized export packaging
It is galvanized steel manufactured with a ductile substrate suitable for forming into deeper or more complex shapes through stamping and drawing.
Deep-drawing grades are designed to provide better ductility and forming performance. General commercial grades may not be suitable for severe deformation.
DX52D is suitable for moderate drawing, while DX53D and DX54D are used for progressively more demanding forming. DX56D may be selected for extra-deep-drawing applications. Final selection depends on the component design.
No. Successful forming also depends on tooling, lubrication, press settings, blank size, material direction and component geometry.
Excessive deformation, poor lubrication or unsuitable tooling can damage the coating. Correct grade selection and forming parameters help reduce this risk.
Yes. Appropriate welding procedures, ventilation and electrode selection are required. The coating near welded areas may require repair.
Yes. Zero-spangle or minimized-spangle surfaces are suitable for further finishing after proper cleaning and pretreatment.
Yes. Anti-fingerprint treatment is available as an optional surface finish and should be specified when ordering.
Yes. Coils can be slit or cut to customized dimensions according to production capability and order requirements.
Please provide:
Required steel grade
Material standard
Thickness
Width and length
Zinc coating weight
Surface treatment
Coil, strip or sheet form
Intended forming process
Component drawing or forming depth
Required quantity
Destination port
ZSJH assists customers in selecting appropriate drawing grades according to forming depth, component geometry and processing requirements.
We can supply several commercial, drawing, deep-drawing and extra-deep-drawing galvanized steel grades.
Products are available as full coils, slit strips and cut-to-length sheets for different production equipment.
Material specifications, dimensional tolerances, coating condition, surface quality and packaging are checked during order execution.
Our team supports customers with grade selection, dimensional confirmation, surface-treatment selection and drawing-based material requirements.
Products are protected with moisture-resistant wrapping, edge guards, steel straps and suitable pallets or skids.
ZSJH supports quotation, specification confirmation, production coordination, documentation and international shipping arrangements.
Send ZSJH your component drawing, forming requirements, steel grade, thickness, dimensions, zinc coating, surface treatment, quantity and destination port. Our team will recommend a suitable high-formability galvanized steel sheet solution.
content is empty!