| Availability: | |
|---|---|
| Quantity: | |
ZSJH
Customers can select the material, thickness, profile, coating, color and sheet length based on the building design and local environmental conditions. Complete roofing and wall systems can also be supplied together with steel frames, purlins, fasteners, flashing and other accessories.
High rigidity with lightweight construction
Good resistance to rain, wind and sunlight
Galvanized and coated surfaces available
Fast installation and reduced construction time
Easy transportation and handling
Multiple profiles and RAL colors
Customized lengths reduce material waste
Suitable for roofing and wall cladding
Low maintenance requirements
Compatible with steel structure building systems

Used for production plants, processing facilities, maintenance buildings and industrial workshops.
Suitable for storage warehouses, distribution centers, cold-chain facilities and logistics buildings.
Applied to barns, farm storage buildings, livestock shelters, equipment sheds and grain storage facilities.
Used for markets, retail buildings, exhibition halls, parking shelters and service centers.
Suitable for construction camps, site offices, equipment shelters and modular buildings.
Corrugated roofing sheets can be used in the following parts of a building:
Sloped roofing systems
Exterior wall cladding
Roof extensions and canopies
Interior partition systems
Equipment protection shelters
Steel structure enclosure systems
Renovation of existing metal roofs
Prefabricated and modular buildings

| Specification | Available Options |
|---|---|
| Base steel | Cold-rolled steel substrate |
| Material options | GI, GL, PPGI and PPGL |
| Sheet profile | Trapezoidal, corrugated wave or project-specific profile |
| Nominal thickness | Approximately 0.25–1.20 mm |
| Sheet length | Cut to order according to transportation and project requirements |
| Overall width | Based on selected profile |
| Effective coverage width | Generally 600–1,100 mm |
| Corrugation height | Customized according to panel profile |
| Zinc coating | Up to approximately Z275 |
| Aluminum-zinc coating | Available according to project requirements |
| Paint finish | PE, SMP, HDP or PVDF |
| Color selection | Standard RAL colors or customized color matching |
| Surface finish | Smooth, matte, embossed or galvanized spangle |
| Edge type | Mill edge, slit edge or customized cutting |
| Accessories | Flashing, ridge cap, gutter, screws and sealing materials |
| Packing method | Waterproof wrapping with steel straps and protective supports |
ZSJH Steel can supply corrugated panels together with structural steel frames, purlins, wall systems, metal decking, fasteners and related building components. This helps customers reduce communication and procurement costs.
We review the project application, drawings, panel profile, local climate and transportation conditions before confirming the product solution.
Steel coils are selected according to the confirmed grade, coating weight, thickness and surface requirements. Material documents can be provided according to the order agreement.
Modern roll-forming equipment helps maintain consistent panel geometry, effective width and cutting length throughout production.
The technical requirements, selected profile, material, thickness, coating, color, length and quantity are confirmed before production.
Suitable galvanized, Galvalume or pre-painted steel coils are prepared and checked against the order specifications.
The coil is placed on an uncoiler and fed steadily into the production line.
The steel strip is leveled and aligned to reduce deviation during roll forming.
Multiple forming rollers gradually shape the flat steel strip into the required corrugated or trapezoidal profile.
The formed panels are measured and cut to the confirmed length.
Panel dimensions, surface condition, profile consistency and coating appearance are checked.
Finished sheets are counted, stacked and protected with suitable packaging materials.
Bundles are secured with straps, corner protection and waterproof covering to reduce transportation damage.
The bundles are arranged according to the container-loading plan and shipped to the agreed destination.
The choice depends on the building type, climate, corrosion level, required service life and budget. Send us your project information, and our team can recommend a suitable material and coating.
Yes. We can review your profile drawing or sample dimensions. Production feasibility depends on the required profile, quantity and available forming equipment.
Yes. Custom-length production is available. Transportation limits and container dimensions should be considered when confirming very long panels.
Galvanized sheets use a zinc-based coating, while Galvalume sheets use an aluminum-zinc alloy coating. Their suitability depends on the application environment and project requirements.
RAL colors can be selected as a reference. Minor differences may occur because of coating batches, gloss levels and display conditions. Physical color samples are recommended for strict color requirements.
content is empty!