| Availability: | |
|---|---|
| Quantity: | |
ZSJH
Different materials, profiles, thicknesses, lengths, coating weights and RAL colors are available to meet specific structural, environmental and architectural requirements.

High structural strength with relatively low weight
Galvanized or aluminum-zinc corrosion protection
Efficient rainwater drainage
Reliable overlapping and fastening design
Fast installation and reduced construction time
Customized profiles, lengths and effective widths
Multiple colors and coating systems available
Suitable for both roofing and wall cladding
Low maintenance requirements
Export-ready protective packaging
| Parameter | Available Specification |
|---|---|
| Product Name | High-Strength Galvanized Corrugated Roofing Sheet |
| Product Type | Sinusoidal, corrugated, ribbed or trapezoidal sheet |
| Base Material | GI, GL, PPGI or PPGL steel |
| Steel Grade | DX51D, DX52D, SGCC, ASTM A653 or equivalent |
| Thickness | 0.20–1.20 mm |
| Overall Width | 600–1,250 mm |
| Effective Width | According to the selected profile |
| Length | 1,000–12,000 mm or customized |
| Corrugation Height | According to profile design |
| Zinc Coating | Z30–Z275 g/m² |
| Aluminum-Zinc Coating | AZ30–AZ150 g/m² |
| Paint System | PE, SMP, HDP or PVDF |
| Top Paint Thickness | Approximately 15–35 μm |
| Back Paint Thickness | Approximately 5–15 μm |
| Surface Finish | Regular spangle, minimized spangle, glossy, matte or embossed |
| Available Colors | Standard and customized RAL colors |
| Installation Method | Self-drilling screws with EPDM sealing washers |
| Packaging | Standard seaworthy export packaging |
The specifications above represent common production options. Final parameters should be confirmed according to project drawings, structural requirements and applicable building standards.

The continuous corrugated profile increases the stiffness of the steel sheet and allows loads to be distributed more effectively across the roofing surface. This design provides improved strength without adding excessive weight to the supporting structure.
The raised corrugations guide rainwater toward the roof drainage system. Correctly designed side overlaps, end overlaps, ridge caps and flashing help form a continuous building-envelope system.
The sheets are commonly fixed to steel or wooden purlins using self-drilling screws with EPDM sealing washers. Fastener spacing and overlap dimensions should be determined according to roof slope, purlin spacing, wind load and local building requirements.
Galvanized, Galvalume or pre-painted steel coils are selected according to the required grade, thickness, coating weight, surface finish and color.
The coils are inspected for thickness, width, coating condition, surface quality, color consistency and visible defects before production.
The selected steel coil is placed on the decoiling equipment and fed continuously into the production line.
The steel sheet passes through leveling rollers to reduce coil curvature and provide a stable surface for profile forming.
A series of matched forming rollers gradually shapes the flat sheet into the required corrugated, sinusoidal or trapezoidal profile.
The formed sheets are automatically measured and cut to the specified project length, helping reduce dimensional variation and on-site material waste.
The finished sheets are inspected for profile dimensions, width, length, edge condition, surface quality and color consistency.
Qualified sheets are stacked neatly and protected using waterproof wrapping, corner guards, steel straps and supporting pallets for transportation.
The corrugated profile improves structural stiffness while maintaining a relatively low material weight. This can help reduce the load on purlins and the primary building structure.
Zinc or aluminum-zinc coatings protect the steel substrate from moisture and oxidation. Optional painted finishes provide an additional protective barrier.
The continuous corrugations promote rapid rainwater drainage. Correct overlap and flashing details improve the overall weather resistance of the roofing system.
The sheets are lightweight, easy to handle and available in customized lengths. This can reduce the number of end laps and accelerate on-site installation.
Galvanized finishes and a wide range of RAL colors are available to suit different architectural styles and corporate color requirements.
Corrugated steel roofing provides a practical balance of strength, durability, installation speed and project cost.
The smooth metallic or painted surface is easy to clean and normally requires limited routine maintenance when correctly specified and installed.
Corrugated roofing sheets are widely used for:
Industrial factories and production workshops
Steel structure warehouses
Logistics and distribution centers
Pre-engineered buildings
Agricultural buildings and barns
Livestock and poultry sheds
Commercial buildings and markets
Garages and carports
Equipment and storage shelters
Temporary buildings and construction camps
Residential and light-commercial roofing
Roof replacement and renovation
Exterior wall-cladding systems
Canopies, walkways and loading areas

The product is suitable for new construction, renovation and replacement projects requiring lightweight construction, fast installation and dependable weather protection.
For coastal, high-humidity, high-temperature or highly corrosive locations, the material grade, metallic coating weight and paint system should be selected according to the actual environmental exposure.
The final sheet thickness and profile should be determined based on:
Roof span and purlin spacing
Design wind pressure
Snow and maintenance loads
Roof slope
Local rainfall conditions
Corrosion category
Required service environment
Applicable building standards
ZSJH can customize:
Corrugated or trapezoidal profile
Corrugation height and spacing
Steel grade
Sheet thickness
Overall and effective width
Customized sheet length
Zinc or aluminum-zinc coating weight
PE, SMP, HDP or PVDF coating
Standard or customized RAL colors
Glossy, matte or embossed finishes
Packaging and shipping method
Matching ridge caps, flashing, gutters, fasteners and other roofing accessories can also be supplied.
The sheets can be manufactured from galvanized steel, Galvalume steel, pre-painted galvanized steel or pre-painted Galvalume steel.
GI is zinc-coated galvanized steel. GL is aluminum-zinc coated steel. PPGI is pre-painted galvanized steel, while PPGL is pre-painted aluminum-zinc coated steel.
Yes. The profile, thickness, overall width, effective width and sheet length can be customized according to the project drawings and production capability.
PE is commonly used for general projects. SMP and HDP provide improved weather resistance. PVDF is suitable for projects requiring higher color retention and long-term exterior performance.
Yes. Standard and customized RAL colors are available, subject to order quantity and raw-material availability.
Yes, but the coating system must be selected for the local corrosion level. Higher metallic coating weights and suitable exterior paint systems may be required.
They are normally fixed to steel or wooden purlins using self-drilling screws with EPDM sealing washers. Correct overlap, fastener spacing and flashing installation are essential.
Yes. Ridge caps, flashing, gutters, fasteners and other related accessories can be supplied according to the roof design.
The sheets are normally stacked with protective wrapping, corner guards, steel straps and supporting pallets. Packaging can be adjusted according to sheet length and transportation requirements.
Please provide:
Required profile or drawing
Material type and steel grade
Sheet thickness
Overall or effective width
Required length
Coating weight
Surface color
Order quantity
Destination port
ZSJH supplies steel products and supporting solutions for industrial buildings, warehouses, pre-engineered structures and international construction projects.
Products can be manufactured according to project drawings, dimensional requirements, material grades, coatings and colors.
Raw-material inspection, roll-forming control, dimensional inspection, surface checks and packaging inspection are carried out throughout production.
In addition to corrugated roofing sheets, ZSJH can supply ridge caps, flashing, gutters, fasteners and related steel-building components.
Products are securely packaged according to sheet dimensions and transportation requirements to reduce the risk of damage during international shipping.
Our team supports product selection, specification confirmation, drawing review, quotation preparation, production coordination and shipment arrangements.
Send your profile drawing, required dimensions, material grade, coating system, color, quantity and destination port to ZSJH. Our team will recommend a suitable corrugated roofing sheet solution for your project.
content is empty!