The experimental platform steelwork was fabricated by September 14, 2024. The project reached completion in early November 2024. Workshop photographs show a long assembly made up of repeating steel bays, with close-up views of framing members along the side and at the end.Request a Fabrication Quote
Project |
Steel Test Platform Construction |
|---|---|
Setting |
Indoor experimental facility |
Fabrication completed |
September 14, 2024 |
Project completed |
Early November 2024 |
Weight per unit (including sand and soil) |
Approximately 600 metric tonnes |
Image1 Steel test platform frame assembled in the fabrication shop
The side views make the repeated posts and diagonal braces easy to identify. The end view shows how the longitudinal framing meets the end of the assembly. When buying similar steelwork, a useful drawing package identifies the typical bay, any bays that differ and the mating faces between assemblies. The fabricator can then distinguish recurring work from pieces that need separate detailing or fit-up checks.
Image2 Repeated steel frame bays along the test platform assembly
Image3 End framing of the steel test platform assembly in the workshop
ZSJH Steel can review whether a frame is best quoted as shop-welded assemblies or as smaller sections for site connection, based on the buyer’s drawings and handling limits. We can work through which pieces repeat, which interfaces need dimensional checks and what overall dimensions each shipping unit must meet. This gives purchasing teams a clear basis for comparing quotes and agreeing on shop assembly, inspection and packaging scope.
Image4 Long steel test platform assembly on the workshop floor
Send a typical bay drawing, any end-frame details, quantities and maximum shipping dimensions. If you already have a preferred fabrication split, mark it on the drawings so we can quote the assemblies on that basis.