Views: 0 Author: Site Editor Publish Time: 2026-07-31 Origin: Site
Winter construction brings additional challenges to steel structure projects due to low temperatures, snow, ice, and harsh weather conditions. To ensure construction safety, installation accuracy, and structural reliability, strict quality control measures should be implemented throughout transportation, installation, welding, and inspection processes.
During winter transportation and storage, effective anti-slip measures must be taken to prevent steel components from sliding or overturning.
The storage area for steel structures should be flat, solid, and free from water accumulation or ice. When stacking steel components of the same type, ensure that they remain level and stable. Supporting pads should be placed vertically in the same alignment to avoid uneven loading and prevent components from slipping or deforming.
Before installation, steel components must undergo a comprehensive inspection in addition to routine quality checks.
Due to possible deformation caused during manufacturing, transportation, or storage, all components should be carefully rechecked under low-temperature conditions. If any deformation exceeds the allowable standard and may affect installation quality, correction and repair must be completed on the ground before lifting.
Only components that meet design requirements and applicable construction standards can proceed with installation.
During lifting operations, when steel cables or hooks directly contact steel components, anti-slip protection pads must be installed to prevent slipping and surface damage.
All temporary accessories lifted together with steel components, including connection plates, installation ladders, alignment tools, and ropes, must be securely fastened.
When lifting components using lifting rings or lifting lugs, carefully inspect the connecting welds to ensure there are no cracks, damage, or potential safety risks before lifting.
For steel structure installation in cold weather conditions, a detailed installation sequence plan must be prepared and strictly followed.
For horizontal installation, construction should generally start from the center of the building and gradually extend toward the surrounding areas.
For vertical installation, components should be installed progressively from the lower sections upward to ensure overall structural stability.
A specific welding procedure must be developed for steel structure welding under low-temperature conditions.
After installing, aligning, and bolting the structural members on each floor of a column section, the required welding shrinkage allowance should be reserved.
Welding should start symmetrically from the center of the structure and extend outward. Welding from the outer edges toward the center is strictly prohibited.
Both ends of the same structural member should not be welded simultaneously to avoid excessive deformation caused by uneven heating.
Before installing steel components, any accumulated snow, ice, or condensation on the surface must be completely removed.
During cleaning, care should be taken not to damage the protective coating or anti-corrosion layer of the steel components.
All specialized tools and equipment used for steel structure installation under low-temperature conditions must be inspected and verified to ensure they meet winter construction requirements.
Proper equipment performance is essential for maintaining installation accuracy and construction safety.
When installing steel structures under negative temperatures, major components such as columns, main beams, and bracing systems must be immediately aligned and corrected after installation.
After adjustment, permanent fixing should be completed without delay.
Steel components installed on the same day should form a stable spatial structural system to ensure installation quality and overall structural safety.
Before installing high-strength bolts, the friction surfaces of steel components must be clean and dry.
The contact surfaces must be free from:
Snow and ice
Rainwater
Soil and dust
Oil contamination
Other impurities
Clean friction surfaces are essential to ensure reliable bolt connection performance.
During the installation of multi-story steel structures, loads placed on completed floors must be strictly controlled.
Construction loads, temporary live loads, snow accumulation, and ice weight must not exceed the load-bearing capacity of steel beams and floor slabs.
Proper load management helps prevent structural deformation and ensures construction safety.
Before welding stud connectors, welding parameters such as welding current and welding time must be properly tested and adjusted according to the actual negative temperature conditions.
Correct parameter calibration ensures welding quality and reliable connection performance under cold weather conditions.
Winter steel structure construction requires strict control of every stage, including transportation, storage, installation, welding, and quality inspection.
By following proper construction procedures and implementing effective cold-weather protection measures, steel structure projects can maintain high installation quality, structural safety, and long-term durability even in challenging winter environments.
ZSJH Steel Group provides professional steel structure design, fabrication, and installation solutions with advanced manufacturing capabilities and extensive project experience worldwide.
content is empty!