:sales@zsjhsteelgroup.com          WhatsApp:+86-15122582058
ChatGPT 图像 2026年10月20日 16_57_10-1
You are here: Home » Products » Building Components & Accessories » Steel Grating » Hot-Dip Galvanized Welded Steel Bar Grating for Industrial Platforms and Walkways

Hot-Dip Galvanized Welded Steel Bar Grating for Industrial Platforms and Walkways

ZSJH hot-dip galvanized welded steel bar grating is designed for industrial platforms, maintenance walkways, catwalks, equipment-access floors and process-plant structures.
Each panel consists of parallel load-bearing flat bars and perpendicular cross bars. The cross bars are resistance-welded to the bearing bars under controlled pressure, forming a rigid open-grid panel with stable spacing and reliable load distribution.
After cutting, banding and fabrication, the completed panels are hot-dip galvanized to provide corrosion protection for outdoor, humid and industrial environments. Custom panel dimensions, bearing-bar sizes, spacing, cutouts, toe plates and fixing accessories can be supplied according to project drawings.
Availability:
Quantity:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
snapchat sharing button
telegram sharing button
sharethis sharing button
  • ZSJH

Main Product Advantages

Reliable Load-Bearing Structure

The vertically positioned bearing bars carry the primary load between supporting beams. Different bar depths, thicknesses and spacings can be selected according to the required clear span and design load.

Rigid Welded Construction

Cross bars are resistance-welded at the intersections, helping maintain panel geometry during transportation, installation and service.

Efficient Drainage and Ventilation

The open-grid structure allows water, dust, light, air and small debris to pass through, making the flooring suitable for process plants and outdoor facilities.

Hot-Dip Galvanized Protection

The completed steel grating is immersed in molten zinc after fabrication, forming a protective coating on exposed surfaces and fabricated edges. Galvanizing can be specified according to ASTM A123/A123M or ISO 1461, subject to the project requirements.

Custom Fabrication

Panels can be manufactured with notches, pipe penetrations, curved cutouts, removable sections, toe plates and banded openings according to approved drawings.

Fast Installation

Prefabricated panels and compatible fixing clips help reduce on-site cutting and welding, improving installation efficiency and future removal access.

Custom cut steel grating panels

Product Specifications

Parameter Available Specification
Product Name Hot-Dip Galvanized Welded Steel Bar Grating
Grating Type Welded bar grating
Base Material Carbon structural steel
Typical Material Grades Q235, Q355, ASTM A36 or project-specified material
Bearing-Bar Type Plain flat bar
Typical Bearing-Bar Size 20 × 3 mm to 60 × 5 mm
Bearing-Bar Spacing Commonly 30 mm or 40 mm centers; customized spacing available
Cross-Bar Type Twisted square bar, round bar or project-specified type
Cross-Bar Spacing Commonly 50 mm or 100 mm centers
Typical Mesh Arrangement 30 × 100 mm, 30 × 50 mm, 40 × 100 mm or customized
Panel Width Commonly up to approximately 1,000 mm or customized
Panel Length Commonly up to approximately 6,000 mm, subject to handling and galvanizing capacity
Panel Edge Open edge or welded banding bar
Surface Treatment Hot-dip galvanized after fabrication
Galvanizing Standard ASTM A123/A123M, ISO 1461 or agreed project standard
Top Surface Plain; serrated surface available as a separate option
Fixing Method Grating clips, saddle clips, bolted fasteners or welded fixing
Fabrication Cutting, notching, banding, openings, toe plates and identification marking
Packaging Bundled with protective spacers and export-ready steel straps

The specifications above represent common manufacturing options. Final bearing-bar size, spacing, panel dimensions and support span must be selected according to the project load requirements.

Understanding the Load Direction

The bearing bars are the deeper parallel flat bars that span between structural supports. They determine the primary load-carrying direction of the panel.

Cross bars maintain the spacing of the bearing bars and distribute localized loads, but they should not be treated as the primary spanning members.

During quotation and installation, drawings should clearly identify:

  • Bearing-bar direction

  • Supporting-beam locations

  • Clear span

  • Panel arrangement

  • Required openings

  • Removable panels

  • Design loads

  • Fixing locations

Installing the panel with the bearing bars running in the wrong direction can significantly reduce its intended load capacity.

Hot-dip galvanized welded steel grating

Application Scenarios

Hot-dip galvanized welded steel grating is suitable for:

  • Industrial work platforms

  • Factory maintenance walkways

  • Process-plant operating floors

  • Petrochemical facilities

  • Oil and gas installations

  • Power-generation plants

  • Water-treatment facilities

  • Mining and mineral-processing plants

  • Conveyor-access platforms

  • Pipe-rack walkways

  • Boiler and turbine platforms

  • Cooling-tower access areas

  • Equipment service platforms

  • Industrial catwalks

  • Outdoor access structures

  • Warehouse maintenance platforms

  • Drainage and ventilation flooring

Suitable Project Scope

This product is suitable for new industrial construction, plant expansion, platform replacement and maintenance-access projects requiring open-grid steel flooring.

It is particularly useful where the floor must provide:

  • Pedestrian access

  • Drainage

  • Natural ventilation

  • Light transmission

  • Reduced accumulation of dust or liquid

  • Access to equipment and pipework below

  • Removable maintenance panels

  • Corrosion protection for exterior service

For coastal, chemical or strongly corrosive environments, the zinc coating alone may not provide the required service life. A duplex system combining galvanizing and paint, stainless steel grating or another project-specific solution may be required.

Manufacturing Process

1. Raw-Material Selection

Carbon steel flat bars and cross bars are selected according to the required material grade, dimensions and mechanical properties.

2. Bearing-Bar Preparation

Steel strip is slit and processed into bearing bars with the specified depth, thickness and length.

3. Panel Arrangement

Bearing bars are positioned parallel to each other at the specified center-to-center spacing.

4. Resistance Welding

Cross bars are pressed into the bearing bars and electrically resistance-welded at the intersections to form a rigid grid.

5. Panel Cutting

The welded grating is cut to the required panel length and width according to the approved layout.

6. Cutouts and Openings

Openings for pipes, columns, valves, cables or equipment are produced according to fabrication drawings.

7. Edge Banding

Panel edges and fabricated openings are welded with banding bars where required. Banding provides a finished edge and helps maintain panel geometry.

8. Toe-Plate Installation

Toe plates can be welded around platform edges or openings when required by the safety design.

9. Deburring and Cleaning

Sharp edges, welding residue and surface contaminants are removed before galvanizing.

10. Hot-Dip Galvanizing

The fabricated panels are cleaned, pickled, fluxed and immersed in molten zinc. The resulting zinc and zinc-iron alloy layers provide bonded corrosion protection.

11. Final Inspection

Panel dimensions, mesh spacing, welds, banding, openings, surface condition and coating are inspected before packaging.

12. Identification and Packaging

Panels can be marked according to the installation layout, bundled with spacers and secured for transportation.

Product Benefits

  • High load capacity relative to panel weight

  • Open surface for drainage and ventilation

  • Durable welded panel construction

  • Corrosion protection from hot-dip galvanizing

  • Reduced on-site fabrication

  • Custom dimensions and opening configurations

  • Easy integration with structural steel platforms

  • Removable fixing options for maintenance access

  • Low accumulation of water and debris

  • Suitable for indoor and outdoor projects

  • Simple visual inspection of supporting structures

  • Efficient packaging and installation sequencing

Request a Quotation

Looking for hot-dip galvanized welded steel grating for your industrial project? Send ZSJH your required bearing-bar size, bar spacing, panel dimensions, support span, design load, surface type, cutout drawings, quantity and destination port.

Our team will review your requirements and provide a project-specific product recommendation, fabrication plan and competitive quotation.

Previous: 
Next: 
Related Products
Related News

content is empty!

Quick Links

Product Category

Other Links

Contact Us
Contact Us
Copyright © 2026 Zhong Sheng Jia He Steel Structure (Tianjin) Co., Ltd. All Rights Reserved.